Merge pull request #353 from xross/fix/352

Fixed ADAT Rx clock ID when SPDIF Rx also enabled

CHANGELOG.rst

@@ -1,6 +1,17 @@
 lib_xua Change Log
 ==================
 
+HEAD
+----
+
+  * ADDED:     Support for XCommon CMake build system
+  * RESOLVED:  Output volume control not enabled by default when MIXER disabled
+  * RESOLVED:  Full 32bit result of volume processing not calculated when required
+  * RESOLVED:  Input stream sending an erroneous zero-length packet when exiting underflow state
+  * RESOLVED   Build failures when XUA_USB_EN = 0
+  * RESOLVED:  Clock configuration issues when ADAT and S/PDIF receive are enabled (#352)
+  * CHANGED:   QUAD_SPI_FLASH replaced by XUA_QUAD_SPI_FLASH (default: 1)
+
 3.5.1
 -----
 

examples/AN00246_xua_example/README.rst

@@ -14,7 +14,7 @@ Required hardware
 .................
 
 The example code provided with the application has been implemented
-and tested on the xCORE-200 Multi-channel Audio Board
+and tested on the xCORE.ai Multi-channel Audio Board
 
 Prerequisites
 .............

lib_xua/api/xua_conf_default.h

@@ -85,10 +85,10 @@
     #if defined(NATIVE_DSD) && (NATIVE_DSD == 0)
         #undef NATIVE_DSD
     #else
-        #define NATIVE_DSD       1  /* Always enable Native DSD when DSD mode is enabled */
+        #define NATIVE_DSD      (1)  /* Always enable Native DSD when DSD mode is enabled */
     #endif
 #else
-    #define DSD_CHANS_DAC        0
+    #define DSD_CHANS_DAC       (0)
 #endif
 
 #define XUA_PCM_FORMAT_I2S      (0)
@@ -114,9 +114,9 @@
  **/
 #ifndef I2S_CHANS_PER_FRAME
     #if (XUA_PCM_FORMAT == XUA_PCM_FORMAT_TDM)
-        #define I2S_CHANS_PER_FRAME 8
+        #define I2S_CHANS_PER_FRAME (8)
     #else
-        #define I2S_CHANS_PER_FRAME 2
+        #define I2S_CHANS_PER_FRAME (2)
     #endif
 #endif
 
@@ -241,7 +241,9 @@
 #endif
 
 /**
- * @brief Default device sample frequency. A safe default should be used. Default: MIN_FREQ
+ * @brief Default device sample frequency. A safe default should be used.
+ *
+ * Default: MIN_FREQ
  */
 #ifndef DEFAULT_FREQ
 #define DEFAULT_FREQ             (MIN_FREQ)
@@ -250,17 +252,21 @@
 /* Audio Class Defines */
 
 /**
- * @brief USB Audio Class Version. Default: 2 (Audio Class version 2.0)
+ * @brief USB Audio Class Version.
+ *
+ * Default: 2 (Audio Class version 2.0)
  */
 #ifndef AUDIO_CLASS
-#define AUDIO_CLASS 2
+#define AUDIO_CLASS              (2)
 #endif
 
 /**
- * @brief Whether or not to fall back to Audio Class 1.0 in USB Full-speed. Default: 0 (Disabled)
+ * @brief Whether or not to fall back to Audio Class 1.0 in USB Full-speed.
+ *
+ * Default: 0 (Disabled i.e. do not fall back to UAC 1.0
  */
 #ifndef AUDIO_CLASS_FALLBACK
-#define AUDIO_CLASS_FALLBACK  0     /* Default to not falling back to UAC 1 */
+#define AUDIO_CLASS_FALLBACK     (0)
 #endif
 
 /**
@@ -272,7 +278,7 @@
 #if (AUDIO_CLASS == 2)
     /* Whether to run in Audio Class 2.0 mode in USB Full-speed */
     #if !defined(FULL_SPEED_AUDIO_2) && (AUDIO_CLASS_FALLBACK == 0)
-        #define FULL_SPEED_AUDIO_2    1     /* Default to falling back to UAC2 */
+        #define FULL_SPEED_AUDIO_2 (1)     /* Default to falling back to UAC2 */
     #endif
 #endif
 
@@ -293,7 +299,9 @@
 /* Feature defines */
 
 /**
- * @brief Number of PDM microphones in the design. Default: None
+ * @brief Number of PDM microphones in the design.
+ *
+ * Default: None
  */
 #ifndef XUA_NUM_PDM_MICS
 #define XUA_NUM_PDM_MICS        (0)
@@ -310,14 +318,18 @@
 #endif
 
 /**
- * @brief Size of a frame of microphone data samples. Default: 1
+ * @brief Size of a frame of microphone data samples.
+ *
+ * Default: 1
  */
 #ifndef XUA_MIC_FRAME_SIZE
 #define XUA_MIC_FRAME_SIZE      (1)
 #endif
 
 /**
- * @brief Enable MIDI functionality including buffering, descriptors etc. Default: DISABLED
+ * @brief Enable MIDI functionality including buffering, descriptors etc.
+ *
+ * Default: 0 (Disabled)
  */
 #ifndef MIDI
 #define MIDI                    (0)
@@ -351,7 +363,9 @@
 #endif
 
 /**
- * @brief Enables ADAT Tx. Default: 0 (Disabled)
+ * @brief Enables ADAT Tx.
+ *
+ * Default: 0 (Disabled)
  */
 #ifndef XUA_ADAT_TX_EN
 #define XUA_ADAT_TX_EN          (0)
@@ -367,14 +381,18 @@
 #endif
 
 /**
- * @brief Enables SPDIF Rx. Default: 0 (Disabled)
+ * @brief Enables SPDIF Rx.
+ *
+ * Default: 0 (Disabled)
  */
 #ifndef XUA_SPDIF_RX_EN
 #define XUA_SPDIF_RX_EN         (0)
 #endif
 
 /**
- * @brief Enables ADAT Rx. Default: 0 (Disabled)
+ * @brief Enables ADAT Rx.
+ *
+ * Default: 0 (Disabled)
  */
 #ifndef XUA_ADAT_RX_EN
 #define XUA_ADAT_RX_EN          (0)
@@ -437,6 +455,15 @@
 #undef XUA_DFU_EN
 #endif
 
+/**
+ * @brief Use a QSPI (rather than SPI) flash for DFU (and boot)
+ *
+ * Default: 1 (True i.e use QSPI flash)
+*/
+#if !defined(XUA_QUAD_SPI_FLASH)
+#define XUA_QUAD_SPI_FLASH      (1)
+#endif
+
 /**
  * @brief Enable HID playback controls functionality.
  *
@@ -1133,9 +1160,13 @@
 #define VOLUME_RES_MIXER        (0x100)
 #endif
 
-/* Handle out volume control in the mixer - enabled by default */
+/* Handle out volume control in the mixer - enabled by default if mixer enabled */
 #ifndef OUT_VOLUME_IN_MIXER
-#define OUT_VOLUME_IN_MIXER         (1)
+#if MIXER
+    #define OUT_VOLUME_IN_MIXER (1)
+#else
+    #define OUT_VOLUME_IN_MIXER (0)
+#endif
 #endif
 
 /* Apply out volume controls after the mix. Only relevant when OUT_VOLUME_IN_MIXER enabled. Enabled by default */
@@ -1148,7 +1179,7 @@
 #define IN_VOLUME_IN_MIXER      (0)
 #endif
 
-/* Apply in volume controls after the mix. Only relebant when IN_VOLUMNE_IN MIXER enabled. Enabled by default */
+/* Apply in volume controls after the mix. Only relevant when IN_VOLUMNE_IN MIXER enabled. Enabled by default */
 #ifndef IN_VOLUME_AFTER_MIX
 #define IN_VOLUME_AFTER_MIX     (1)
 #endif
@@ -1245,8 +1276,6 @@ enum USBEndpointNumber_Out
 #endif /* __ASSEMBLER__ */
 
 #define AUDIO_STOP_FOR_DFU                (0x12345678)
-#define AUDIO_START_FROM_DFU              (0x87654321)
-#define AUDIO_REBOOT_FROM_DFU             (0xa5a5a5a5)
 
 /* Result of db_to_mult(MAX_VOLUME, 8, 29) */
 #define MAX_VOLUME_MULT                   (0x20000000)
@@ -1349,7 +1378,7 @@ enum USBEndpointNumber_Out
 /* Some defines that allow us to remove unused code */
 
 /* Useful for dropping lower part of macs in volume processing... */
-#if (FS_STREAM_FORMAT_OUTPUT_1_RESOLUTION_BITS > 24) || (HS_STREAM_FORMAT_OUTPUT_2_RESOLUTION_BITS > 24) || \
+#if (FS_STREAM_FORMAT_OUTPUT_1_RESOLUTION_BITS > 24) || (HS_STREAM_FORMAT_OUTPUT_1_RESOLUTION_BITS > 24) || \
     (((FS_STREAM_FORMAT_OUTPUT_2_RESOLUTION_BITS > 24) || (HS_STREAM_FORMAT_OUTPUT_2_RESOLUTION_BITS > 24)) && (OUTPUT_FORMAT_COUNT > 1)) || \
     (((FS_STREAM_FORMAT_OUTPUT_3_RESOLUTION_BITS > 24) || (HS_STREAM_FORMAT_OUTPUT_3_RESOLUTION_BITS > 24)) && (OUTPUT_FORMAT_COUNT > 2))
     #define STREAM_FORMAT_OUTPUT_RESOLUTION_32BIT_USED 1
@@ -1383,29 +1412,29 @@ enum USBEndpointNumber_Out
 #endif
 
 /* Useful for dropping lower part of macs in volume processing... */
-    #if (FS_STREAM_FORMAT_INPUT_1_RESOLUTION_BITS > 24) || (FS_STREAM_FORMAT_INPUT_2_RESOLUTION_BITS > 24)
+#if (FS_STREAM_FORMAT_INPUT_1_RESOLUTION_BITS > 24) || (HS_STREAM_FORMAT_INPUT_1_RESOLUTION_BITS > 24)
     #define STREAM_FORMAT_INPUT_RESOLUTION_32BIT_USED 1
-    #else
+#else
     #define STREAM_FORMAT_INPUT_RESOLUTION_32BIT_USED 0
-    #endif
+#endif
 
-    #if((FS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 4) || (HS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 4))
+#if((FS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 4) || (HS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 4))
     #define STREAM_FORMAT_INPUT_SUBSLOT_4_USED 1
-    #else
+#else
     #define STREAM_FORMAT_INPUT_SUBSLOT_4_USED 0
-    #endif
+#endif
 
-    #if((FS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 3) || (HS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 3))
+#if((FS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 3) || (HS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 3))
     #define STREAM_FORMAT_INPUT_SUBSLOT_3_USED 1
-    #else
+#else
     #define STREAM_FORMAT_INPUT_SUBSLOT_3_USED 0
-    #endif
+#endif
 
-    #if((FS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 2) || (HS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 2))
+#if((FS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 2) || (HS_STREAM_FORMAT_INPUT_1_SUBSLOT_BYTES == 2))
     #define STREAM_FORMAT_INPUT_SUBSLOT_2_USED 1
-    #else
+#else
     #define STREAM_FORMAT_INPUT_SUBSLOT_2_USED 0
-    #endif
+#endif
 
 #if MAX_FREQ < MIN_FREQ
 #error MAX_FREQ should be >= MIN_FREQ!!

lib_xua/lib_build_info.cmake

@@ -0,0 +1,51 @@
+set(LIB_NAME lib_xua)
+set(LIB_VERSION 3.5.1)
+set(LIB_INCLUDES api
+                 src/core
+                 src/core/audiohub
+                 src/core/buffer/ep
+                 src/core/endpoint0
+                 src/dfu
+                 src/core/buffer/decouple
+                 src/core/clocking
+                 src/core/mixer
+                 src/core/pdm_mics
+                 src/core/ports
+                 src/core/support
+                 src/core/user
+                 src/core/user/audiostream
+                 src/core/user/hid
+                 src/core/user/hostactive
+                 src/hid
+                 src/midi)
+set(LIB_OPTIONAL_HEADERS xua_conf.h static_hid_report.h)
+set(LIB_DEPENDENT_MODULES "lib_locks"
+                          "lib_logging"
+                          "lib_mic_array(feature/xcommon_cmake)"
+                          "lib_spdif"
+                          "lib_xassert"
+                          "lib_xud"
+                          "lib_adat")
+
+set(LIB_COMPILER_FLAGS -O3 -DREF_CLK_FREQ=100 -fasm-linenum -fcomment-asm)
+
+if(CMAKE_BUILD_TYPE STREQUAL "Debug")
+    list(APPEND LIB_COMPILER_FLAGS -DXASSERT_ENABLE_ASSERTIONS=1
+                                   -DXASSERT_ENABLE_DEBUG=1
+                                   -DXASSERT_ENBALE_LINE_NUMBERS=1)
+else()
+    list(APPEND LIB_COMPILER_FLAGS -DXASSERT_ENABLE_ASSERTIONS=0
+                                   -DXASSERT_ENABLE_DEBUG=0
+                                   -DXASSERT_ENABLE_LINE_NUMBERS=0)
+endif()
+
+set(LIB_COMPILER_FLAGS_xua_endpoint0.c ${LIB_COMPILER_FLAGS} -Os -mno-dual-issue)
+set(LIB_COMPILER_FLAGS_xua_ep0_uacreqs.xc ${LIB_COMPILER_FLAGS} -Os -mno-dual-issue)
+set(LIB_COMPILER_FLAGS_dbcalc.xc ${LIB_COMPILER_FLAGS} -Os -mno-dual-issue)
+set(LIB_COMPILER_FLAGS_audioports.c ${LIB_COMPILER_FLAGS} -Os -mno-dual-issue)
+set(LIB_COMPILER_FLAGS_audioports.xc ${LIB_COMPILER_FLAGS} -Os -mno-dual-issue)
+set(LIB_COMPILER_FLAGS_dfu.xc ${LIB_COMPILER_FLAGS} -Os -mno-dual-issue)
+set(LIB_COMPILER_FLAGS_flash_interface.c ${LIB_COMPILER_FLAGS} -Os -mno-dual-issue)
+set(LIB_COMPILER_FLAGS_flashlib_user.c ${LIB_COMPILER_FLAGS} -Os -mno-dual-issue)
+
+XMOS_REGISTER_MODULE()

lib_xua/src/core/audiohub/xua_audiohub.xc

@@ -806,7 +806,7 @@ void XUA_AudioHub(chanend ?c_aud, clock ?clk_audio_mclk, clock ?clk_audio_bclk,
         {
             /* TODO wait for good mclk instead of delay */
             /* No delay for DFU modes */
-            if (((curSamFreq / AUD_TO_USB_RATIO) != AUDIO_REBOOT_FROM_DFU) && ((curSamFreq / AUD_TO_USB_RATIO) != AUDIO_STOP_FOR_DFU) && command)
+            if (((curSamFreq / AUD_TO_USB_RATIO) != AUDIO_STOP_FOR_DFU) && command)
             {
 #if 0
                 /* User should ensure MCLK is stable in AudioHwConfig */
@@ -916,13 +916,9 @@ void XUA_AudioHub(chanend ?c_aud, clock ?clk_audio_mclk, clock ?clk_audio_bclk,
 #else
                         dummy_deliver(c_aud, command);
 #endif
+                        /* Note, we do not expect to reach here */
                         curSamFreq = inuint(c_aud);
-
-                        if (curSamFreq == AUDIO_START_FROM_DFU)
-                        {
                         outct(c_aud, XS1_CT_END);
-                            break;
-                        }
                     }
                 }
 #endif

lib_xua/src/core/buffer/decouple/decouple.xc

@@ -514,7 +514,7 @@ __builtin_unreachable();
     {
         /* Finished creating packet - commit it to the FIFO */
         /* Total samps to write could start at 0 (i.e. no MCLK) so need to check for < 0) */
-        if (sampsToWrite <= 0)
+        if(sampsToWrite <= 0)
         {
             int speed, wrPtr;
             packState = 0;
@@ -651,6 +651,7 @@ __builtin_unreachable();
 
 #if (NUM_USB_CHAN_IN > 0)
 /* Mark Endpoint (IN) ready with an appropriately sized zero buffer */
+/* TODO We should properly size zeros packet rather than using "mid" */
 static inline void SetupZerosSendBuffer(XUD_ep aud_to_host_usb_ep, unsigned sampFreq, unsigned slotSize,
                                         xc_ptr aud_to_host_zeros)
 {
@@ -659,8 +660,8 @@ static inline void SetupZerosSendBuffer(XUD_ep aud_to_host_usb_ep, unsigned samp
 
     /* Set IN stream packet size to something sensible. We expect the buffer to
      * over flow and this to be reset */
-    SET_SHARED_GLOBAL(sampsToWrite, 0);
+    SET_SHARED_GLOBAL(sampsToWrite, mid);
-    SET_SHARED_GLOBAL(totalSampsToWrite, 0);
+    SET_SHARED_GLOBAL(totalSampsToWrite, mid);
 
     mid *= g_numUsbChan_In * slotSize;
 
@@ -821,6 +822,7 @@ void XUA_Buffer_Decouple(chanend c_mix_out
                     SetupZerosSendBuffer(aud_to_host_usb_ep, sampFreq, g_curSubSlot_In, aud_to_host_zeros);
 #endif
 
+#if (NUM_USB_CHAN_OUT > 0)
                     /* Reset OUT buffer state */
                     outUnderflow = 1;
                     SET_SHARED_GLOBAL(g_aud_from_host_rdptr, aud_from_host_fifo_start);
@@ -830,9 +832,10 @@ void XUA_Buffer_Decouple(chanend c_mix_out
                     if(outOverflow)
                     {
                         /* If we were previously in overflow we wont have marked as ready */
-                        XUD_SetReady_OutPtr(aud_from_host_usb_ep, aud_from_host_fifo_start+4);
+                        XUD_SetReady_OutPtr(aud_from_host_usb_ep, aud_from_host_fifo_start + 4);
                         outOverflow = 0;
                     }
+#endif
                 }
 
                 /* Wait for handshake back and pass back up */
@@ -906,6 +909,7 @@ void XUA_Buffer_Decouple(chanend c_mix_out
                 GET_SHARED_GLOBAL(dataFormat, g_formatChange_DataFormat);
                 GET_SHARED_GLOBAL(sampRes, g_formatChange_SampRes);
 
+#if (NUM_USB_CHAN_OUT > 0)
                 /* Reset OUT buffer state */
                 SET_SHARED_GLOBAL(g_aud_from_host_rdptr, aud_from_host_fifo_start);
                 SET_SHARED_GLOBAL(g_aud_from_host_wrptr, aud_from_host_fifo_start);
@@ -921,6 +925,7 @@ void XUA_Buffer_Decouple(chanend c_mix_out
                     XUD_SetReady_OutPtr(aud_from_host_usb_ep, aud_from_host_fifo_start+4);
                     outOverflow = 0;
                 }
+#endif
 
 #ifdef NATIVE_DSD
                 if(dataFormat == UAC_FORMAT_TYPEI_RAW_DATA)
@@ -1041,7 +1046,7 @@ void XUA_Buffer_Decouple(chanend c_mix_out
 
                 DISABLE_INTERRUPTS();
 
-                if (inUnderflow)
+                if(inUnderflow)
                 {
                     int fillLevel;
                     GET_SHARED_GLOBAL(fillLevel, g_aud_to_host_fill_level);

lib_xua/src/core/clocking/clockgen.xc

@@ -1,6 +1,5 @@
 // Copyright 2011-2023 XMOS LIMITED.
 // This Software is subject to the terms of the XMOS Public Licence: Version 1.
-
 #include <xs1.h>
 #include <assert.h>
 #include <print.h>
@@ -141,9 +140,6 @@ static inline void setClockValidity(chanend c_interruptControl, int clkIndex, in
     }
 }
 
-
-
-
 /* Returns 1 for valid clock found else 0 */
 static inline int validSamples(Counter &counter, int clockIndex)
 {
@@ -219,18 +215,6 @@ static inline int validSamples(Counter &counter, int clockIndex)
 }
 #endif
 
-#if (XUA_SPDIF_RX_EN)
-//:badParity
-/* Returns 1 for bad parity, else 0 */
-static inline int badParity(unsigned x)
-{
-    unsigned X = (x>>4);
-    crc32(X, 0, 1);
-    return X & 1;
-}
-//:
-#endif
-
 #ifdef LEVEL_METER_LEDS
 void VendorLedRefresh(unsigned levelData[]);
 unsigned g_inputLevelData[NUM_USB_CHAN_IN];
@@ -269,9 +253,10 @@ void clockGen (streaming chanend ?c_spdif_rx, chanend ?c_adat_rx, client interfa
     int spdifUnderflow = 1;
     int spdifSamps = 0;                            /* Number of samples in buffer */
     Counter spdifCounters;
-    int spdifReceivedTime;
+    int spdifRxTime;
     unsigned tmp2;
     unsigned spdifLeft = 0;
+    unsigned spdifRxData;
 #endif
 
 #if (XUA_ADAT_RX_EN)
@@ -330,7 +315,6 @@ void clockGen (streaming chanend ?c_spdif_rx, chanend ?c_adat_rx, client interfa
     adatCounters.samplesPerTick = 0;
 #endif
 
-
     t_local :> timeNextEdge;
     timeLastEdge = timeNextEdge;
     timeNextClockDetection = timeNextEdge + (LOCAL_CLOCK_INCREMENT / 2);
@@ -521,25 +505,25 @@ void clockGen (streaming chanend ?c_spdif_rx, chanend ?c_adat_rx, client interfa
 #endif
 
 #if (XUA_SPDIF_RX_EN)
-            /* Receive sample from S/PDIF RX thread (steaming chan) */
+            /* Receive sample from S/PDIF RX thread (streaming chan) */
-            case c_spdif_rx :> tmp:
+            case c_spdif_rx :> spdifRxData:
 
                 /* Record time of sample */
-				t_local :> spdifReceivedTime;
+                t_local :> spdifRxTime;
 
                 /* Check parity and ignore if bad */
-                if(badParity(tmp))
+                if(spdif_rx_check_parity(spdifRxData))
                     continue;
 
-                /* Get pre-amble */
+                /* Get preamble */
-				tmp2 = tmp & 0xF;
+                unsigned preamble = spdifRxData & SPDIF_RX_PREAMBLE_MASK;
-                switch(tmp2)
+
+                switch(preamble)
                 {
                     /* LEFT */
                     case SPDIF_FRAME_X:
                     case SPDIF_FRAME_Z:
-
+                        spdifLeft = SPDIF_RX_EXTRACT_SAMPLE(spdifRxData);
-                        spdifLeft = tmp << 4;
                         break;
 
                     /* RIGHT */
@@ -550,7 +534,7 @@ void clockGen (streaming chanend ?c_spdif_rx, chanend ?c_adat_rx, client interfa
                         {
                             /* Store left and right sample pair to buffer */
                             spdifSamples[spdifWr] = spdifLeft;
-                            spdifSamples[spdifWr+1] = tmp << 4;
+                            spdifSamples[spdifWr+1] = SPDIF_RX_EXTRACT_SAMPLE(spdifRxData);
 
                             spdifWr = (spdifWr + 2) & (MAX_SPDIF_SAMPLES - 1);
 
@@ -586,13 +570,13 @@ void clockGen (streaming chanend ?c_spdif_rx, chanend ?c_adat_rx, client interfa
                     if((spdifCounters.receivedSamples >=  spdifCounters.samplesPerTick))
                     {
                         /* Check edge is about right... S/PDIF may have changed freq... */
-                        if(timeafter(spdifReceivedTime, (timeLastEdge + LOCAL_CLOCK_INCREMENT - LOCAL_CLOCK_MARGIN)))
+                        if(timeafter(spdifRxTime, (timeLastEdge + LOCAL_CLOCK_INCREMENT - LOCAL_CLOCK_MARGIN)))
                         {
                             /* Record edge time */
-                            timeLastEdge = spdifReceivedTime;
+                            timeLastEdge = spdifRxTime;
 
                             /* Setup for next edge */
-                            timeNextEdge = spdifReceivedTime + LOCAL_CLOCK_INCREMENT + LOCAL_CLOCK_MARGIN;
+                            timeNextEdge = spdifRxTime + LOCAL_CLOCK_INCREMENT + LOCAL_CLOCK_MARGIN;
 
                             /* Toggle edge */
                             i_pll_ref.toggle_timed(1);
@@ -705,7 +689,6 @@ void clockGen (streaming chanend ?c_spdif_rx, chanend ?c_adat_rx, client interfa
 
                                             /* Reset counters */
                                             adatCounters.receivedSamples = 0;
-
                                         }
                                     }
                                 }
@@ -716,7 +699,6 @@ void clockGen (streaming chanend ?c_spdif_rx, chanend ?c_adat_rx, client interfa
                     break;
 #endif
 
-
 #if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN)
                 /* AudioHub requests data */
                 case inuint_byref(c_dig_rx, tmp):
@@ -842,8 +824,6 @@ void clockGen (streaming chanend ?c_spdif_rx, chanend ?c_adat_rx, client interfa
                 break;
 #endif
         }
-
     }
 }
 
-

lib_xua/src/core/main.xc

@@ -30,8 +30,8 @@
 #include "iap.h"
 #endif
 
-#if (XUA_SPDIF_RX_EN)
+#if (XUA_SPDIF_RX_EN || XUA_SPDIF_TX_EN)
-#include "spdif.h"
+#include "spdif.h"                     /* From lib_spdif */
 #endif
 
 #if (XUA_ADAT_RX_EN)
@@ -42,10 +42,6 @@
 #include "xua_pdm_mic.h"
 #endif
 
-#if (XUA_SPDIF_TX_EN)
-#include "spdif.h"   /* From lib_spdif */
-#endif
-
 #if (XUA_DFU_EN == 1)
 [[distributable]]
 void DFUHandler(server interface i_dfu i, chanend ?c_user_cmd);
@@ -340,7 +336,7 @@ void usb_audio_io(chanend ?c_aud_in,
 
     par
     {
-#if (MIXER)
+#if (MIXER && XUA_USB_EN)
         /* Mixer cores(s) */
         {
             thread_speed();
@@ -497,14 +493,12 @@ int main()
         on tile[XUD_TILE]:
         par
         {
-#if (XUD_TILE == 0)
+#if XUA_USB_EN
+#if ((XUD_TILE == 0) && (XUA_DFU_EN == 1))
             /* Check if USB is on the flash tile (tile 0) */
-#if (XUA_DFU_EN == 1)
             [[distribute]]
             DFUHandler(dfuInterface, null);
 #endif
-#endif
-#if XUA_USB_EN
 
             /* Core USB task, buffering, USB etc */
             {
@@ -643,7 +637,7 @@ int main()
         on tile[XUD_TILE]:
         {
             thread_speed();
-            spdif_rx(c_spdif_rx,p_spdif_rx,clk_spd_rx,192000);
+            spdif_rx(c_spdif_rx, p_spdif_rx, clk_spd_rx, 192000);
         }
 #endif
 

lib_xua/src/core/xua_commands.h

@@ -1,8 +1,7 @@
-// Copyright 2011-2021 XMOS LIMITED.
+// Copyright 2011-2023 XMOS LIMITED.
 // This Software is subject to the terms of the XMOS Public Licence: Version 1.
-
+#ifndef _XUA_COMMANDS_H_
-#ifndef __XUA_INTERNAL_CMDS_H__
+#define _XUA_COMMANDS_H_
-#define __XUA_INTERNAL_CMDS_H__
 
 #include "xua.h"
 
@@ -14,7 +13,7 @@
 
 #define CLOCK_INTERNAL          1
 #define CLOCK_SPDIF             2
-#if SPDIF_RX
+#if (XUA_SPDIF_RX_EN)
 #define CLOCK_ADAT              3
 #else
 #define CLOCK_ADAT              2

lib_xua/src/dfu/flash_interface.c

@@ -1,4 +1,4 @@
-// Copyright 2011-2021 XMOS LIMITED.
+// Copyright 2011-2023 XMOS LIMITED.
 // This Software is subject to the terms of the XMOS Public Licence: Version 1.
 #include <xs1.h>
 #include <flash.h>
@@ -72,7 +72,7 @@ int flash_cmd_init(void)
         return 1;
     }
 
-#ifndef QUAD_SPI_FLASH
+#if (!XUA_QUAD_SPI_FLASH)
     // Disable flash protection
     fl_setProtection(0);
 #endif

lib_xua/src/dfu/flashlib_user.c

@@ -1,11 +1,11 @@
-// Copyright 2012-2021 XMOS LIMITED.
+// Copyright 2012-2023 XMOS LIMITED.
 // This Software is subject to the terms of the XMOS Public Licence: Version 1.
 #include "xua.h"
 #if (XUA_DFU_EN == 1)
 #include "uac_hwresources.h"
 #include <xs1.h>
 #include <xclib.h>
-#ifdef QUAD_SPI_FLASH
+#if (XUA_QUAD_SPI_FLASH)
 #include <quadflashlib.h>
 #else
 #include <flashlib.h>
@@ -20,7 +20,7 @@
 
 #ifdef DFU_FLASH_DEVICE
 
-#ifdef QUAD_SPI_FLASH
+#if (XUA_QUAD_SPI_FLASH)
 /* Using specified flash device rather than all supported in tools */
 fl_QuadDeviceSpec flash_devices[] = {DFU_FLASH_DEVICE};
 #else
@@ -29,7 +29,7 @@ fl_DeviceSpec flash_devices[] = {DFU_FLASH_DEVICE};
 #endif
 #endif
 
-#ifdef QUAD_SPI_FLASH
+#if (XUA_QUAD_SPI_FLASH)
 /*
 typedef struct {
       out port qspiCS;
@@ -60,7 +60,7 @@ fl_PortHolderStruct p_flash =
 int flash_cmd_enable_ports()
 {
     int result = 0;
-#ifdef QUAD_SPI_FLASH
+#if (XUA_QUAD_SPI_FLASH)
     /* Ports not shared */
 #else
     setc(p_flash.spiMISO, XS1_SETC_INUSE_OFF);
@@ -89,14 +89,14 @@ int flash_cmd_enable_ports()
 #endif
 
 #ifdef DFU_FLASH_DEVICE
-#ifdef QUAD_SPI_FLASH
+#if (XUA_QUAD_SPI_FLASH)
     result = fl_connectToDevice(&p_qflash, flash_devices, sizeof(flash_devices) / sizeof(fl_QuadDeviceSpec));
 #else
     result = fl_connectToDevice(&p_flash, flash_devices, sizeof(flash_devices) / sizeof(fl_DeviceSpec));
 #endif
 #else
     /* Use default flash list */
-#ifdef QUAD_SPI_FLASH
+#if (XUA_QUAD_SPI_FLASH)
     result = fl_connect(&p_qflash);
 #else
     result = fl_connect(&p_flash);
@@ -117,7 +117,7 @@ int flash_cmd_disable_ports()
 {
     fl_disconnect();
 
-#ifndef QUAD_SPI_FLASH
+#if (!XUA_QUAD_SPI_FLASH)
     setc(p_flash.spiMISO, XS1_SETC_INUSE_OFF);
     setc(p_flash.spiCLK, XS1_SETC_INUSE_OFF);
     setc(p_flash.spiMOSI, XS1_SETC_INUSE_OFF);