dengweijie/lib_xua
1
0
Fork 0
forked from PAWPAW-Mirror/lib_xua
Code Pull Requests Activity

Merge pull request #363 from ed-xmos/feature/sw_pll_sync_ua

Browse Source 
Use sw_pll for sync targets on XS3
This commit is contained in:
Ross Owen
2024-01-26 16:57:16 +00:00
committed by GitHub
parent 4edf86b3a6 cffb7a272d
commit 165417962f
24 changed files with 1265 additions and 973 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
CHANGELOG.rst
View File

@@ -14,7 +14,7 @@ HEAD
* CHANGED: QUAD_SPI_FLASH replaced by XUA_QUAD_SPI_FLASH (default: 1) * CHANGED: QUAD_SPI_FLASH replaced by XUA_QUAD_SPI_FLASH (default: 1)
* CHANGED: UserBufferManagementInit() now takes a sample rate parameter * CHANGED: UserBufferManagementInit() now takes a sample rate parameter
* CHANGED: xcore.ai targets use sigma-delta software PLL for clock recovery of * CHANGED: xcore.ai targets use sigma-delta software PLL for clock recovery of
digital Rx streams by default. digital Rx streams and synch USB audio by default.
* Changes to dependencies: * Changes to dependencies:

67
lib_xua/api/xua_audiohub.h
View File

@@ -12,34 +12,42 @@
#include "dfu_interface.h" #include "dfu_interface.h"
#endif #endif
#include "xua_clocking.h"
/** The audio driver thread. /** The audio driver thread.
* *
* This function drives I2S ports and handles samples to/from other digital * This function drives I2S ports and handles samples to/from other digital
* I/O threads. * I/O threads.
* *
* \param c_aud Audio sample channel connected to the mixer() thread or the * \param c_aud Audio sample channel connected to the mixer() thread or the
* decouple() thread * decouple() thread
* *
* \param clk_audio_mclk Nullable clockblock to be clocked from master clock * \param clk_audio_mclk Nullable clockblock to be clocked from master clock
* *
* \param clk_audio_bclk Nullable clockblock to be clocked from i2s bit clock * \param clk_audio_bclk Nullable clockblock to be clocked from i2s bit clock
* *
* \param p_mclk_in Master clock inport port (must be 1-bit) * \param p_mclk_in Master clock inport port (must be 1-bit)
* *
* \param p_lrclk Nullable port for I2S sample clock * \param p_lrclk Nullable port for I2S sample clock
* *
* \param p_bclk Nullable port for I2S bit * \param p_bclk Nullable port for I2S bit clock
* *
* \param p_i2s_dac Nullable array of ports for I2S data output lines * \param p_i2s_dac Nullable array of ports for I2S data output lines
* *
* \param p_i2s_adc Nullable array of ports for I2S data input lines * \param p_i2s_adc Nullable array of ports for I2S data input lines
* *
* \param c_spdif_tx Channel connected to S/PDIF transmiter core from lib_spdif * \param i_SoftPll Interface to software PLL task
* *
* \param c_dig Channel connected to the clockGen() thread for * \param c_spdif_tx Channel connected to S/PDIF transmitter core from lib_spdif
* receiving/transmitting samples
* *
* \param c_mclk_change Channel notifying clockgen of an mclk frequency change * \param c_dig Channel connected to the clockGen() thread for
* receiving/transmitting samples
*
* \param c_audio_rate_change Channel notifying ep_buffer of an mclk frequency change and sync for stable clock
*
* \param dfuInterface Interface supporting DFU methods
*
* \param c_pdm_in Channel for receiving decimated PDM samples
*/ */
void XUA_AudioHub(chanend ?c_aud, void XUA_AudioHub(chanend ?c_aud,
clock ?clk_audio_mclk, clock ?clk_audio_mclk,
@@ -54,12 +62,14 @@ void XUA_AudioHub(chanend ?c_aud,
#endif #endif
#if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN || defined(__DOXYGEN__)) #if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN || defined(__DOXYGEN__))
, chanend c_dig , chanend c_dig
, chanend c_mclk_change
#endif #endif
#if (XUD_TILE != 0) && (AUDIO_IO_TILE == 0) && (XUA_DFU_EN == 1) #if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC || XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN || defined(__DOXYGEN__))
, chanend c_audio_rate_change
#endif
#if (((XUD_TILE != 0) && (AUDIO_IO_TILE == 0) && (XUA_DFU_EN == 1)) || defined(__DOXYGEN__))
, server interface i_dfu ?dfuInterface , server interface i_dfu ?dfuInterface
#endif #endif
#if (XUA_NUM_PDM_MICS > 0) #if (XUA_NUM_PDM_MICS > 0 || defined(__DOXYGEN__))
, chanend c_pdm_in , chanend c_pdm_in
#endif #endif
); );
@@ -79,8 +89,29 @@ void AudioHwConfig(unsigned samFreq, unsigned mClk, unsigned dsdMode,
#endif // __XC__ #endif // __XC__
void UserBufferManagementInit(unsigned samFreq); /**
* @brief User buffer management code
*
* This function is called at the sample rate of the USB Audio stack (e.g,. 48 kHz) and between the two parameter arrays
* contain a full multi-channel audio-frame. The first array carries all the data that has been received from the USB host
* and is to be presented to the audio interfaces. The second array carries all the data received from the interfaces and
* is to be presented to the USB host. The user can chose to intercept and overwrite the samples stored in these arrays.
*
* \param sampsFromUsbToAudio Samples received from USB host and to be presented to audio interfaces
*
* \param sampsFromAudioToUsb Samples received from the audio interfaces and to be presented to the USB host
*/
void UserBufferManagement(unsigned sampsFromUsbToAudio[], unsigned sampsFromAudioToUsb[]); void UserBufferManagement(unsigned sampsFromUsbToAudio[], unsigned sampsFromAudioToUsb[]);
/**
* @brief User buffer managment init code
*
* This function is called once, before the first call to UserBufferManagement(), and can be used to initialise any
* related user state
*
* \param sampFreq The initial sample frequency
*
*/
void UserBufferManagementInit(unsigned sampFreq);
#endif // _XUA_AUDIOHUB_H_ #endif // _XUA_AUDIOHUB_H_

57
lib_xua/api/xua_buffer.h
View File

@@ -1,7 +1,7 @@
// Copyright 2011-2022 XMOS LIMITED. // Copyright 2011-2024 XMOS LIMITED.
// This Software is subject to the terms of the XMOS Public Licence: Version 1. // This Software is subject to the terms of the XMOS Public Licence: Version 1.
#ifndef __XUA_BUFFER_H__ #ifndef _XUA_BUFFER_H_
#define __XUA_BUFFER_H__ #define _XUA_BUFFER_H_
#if __XC__ #if __XC__
@@ -13,19 +13,21 @@
* Most of the chanend parameters to the function should be connected to * Most of the chanend parameters to the function should be connected to
* XUD_Manager(). The uses two cores. * XUD_Manager(). The uses two cores.
* *
* \param c_aud_out Audio OUT endpoint channel connected to the XUD * \param c_aud_out Audio OUT endpoint channel connected to the XUD
* \param c_aud_in Audio IN endpoint channel connected to the XUD * \param c_aud_in Audio IN endpoint channel connected to the XUD
* \param c_aud_fb Audio feedback endpoint channel connected to the XUD * \param c_aud_fb Audio feedback endpoint channel connected to the XUD
* \param c_midi_from_host MIDI OUT endpoint channel connected to the XUD * \param c_midi_from_host MIDI OUT endpoint channel connected to the XUD
* \param c_midi_to_host MIDI IN endpoint channel connected to the XUD * \param c_midi_to_host MIDI IN endpoint channel connected to the XUD
* \param c_midi Channel connected to MIDI core * \param c_midi Channel connected to MIDI core
* \param c_int Audio clocking interrupt endpoint channel connected to the XUD * \param c_int Audio clocking interrupt endpoint channel connected to the XUD
* \param c_clk_int Optional chanend connected to the clockGen() thread if present * \param c_clk_int Optional chanend connected to the clockGen() thread if present
* \param c_sof Start of frame channel connected to the XUD * \param c_sof Start of frame channel connected to the XUD
* \param c_aud_ctl Audio control channel connected to Endpoint0() * \param c_aud_ctl Audio control channel connected to Endpoint0()
* \param p_off_mclk A port that is clocked of the MCLK input (not the MCLK input itself) * \param p_off_mclk A port that is clocked of the MCLK input (not the MCLK input itself)
* \param c_aud Channel connected to XUA_AudioHub() core * \param c_aud Channel connected to XUA_AudioHub() core
* \param i_pll_ref Interface to task that toggles reference pin to CS2100 * \param c_audio_rate_change Channel to notify and synchronise on audio rate change
* \param i_pll_ref Interface to task that toggles reference pin to CS2100
* \param c_swpll_update Channel connected to software PLL task. Expects master clock counts based on USB frames.
*/ */
void XUA_Buffer( void XUA_Buffer(
chanend c_aud_out, chanend c_aud_out,
@@ -38,7 +40,7 @@ void XUA_Buffer(
#if defined(MIDI) || defined(__DOXYGEN__) #if defined(MIDI) || defined(__DOXYGEN__)
chanend c_midi_from_host, chanend c_midi_from_host,
chanend c_midi_to_host, chanend c_midi_to_host,
chanend c_midi, chanend c_midi,
#endif #endif
#if XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN || defined(__DOXYGEN__) #if XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN || defined(__DOXYGEN__)
chanend ?c_int, chanend ?c_int,
@@ -51,8 +53,14 @@ void XUA_Buffer(
, chanend c_hid , chanend c_hid
#endif #endif
, chanend c_aud , chanend c_aud
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) || defined(__DOXYGEN__) #if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) || defined(__DOYXGEN__)
, chanend c_audio_rate_change
#if (!XUA_USE_SW_PLL) || defined(__DOXYGEN__)
, client interface pll_ref_if i_pll_ref , client interface pll_ref_if i_pll_ref
#endif
#if (XUA_USE_SW_PLL) || defined(__DOXYGEN__)
, chanend c_swpll_update
#endif
#endif #endif
); );
@@ -66,7 +74,7 @@ void XUA_Buffer_Ep(chanend c_aud_out,
#ifdef MIDI #ifdef MIDI
chanend c_midi_from_host, chanend c_midi_from_host,
chanend c_midi_to_host, chanend c_midi_to_host,
chanend c_midi, chanend c_midi,
#endif #endif
#if (XUA_SPDIF_RX_EN) || (XUA_ADAT_RX_EN) #if (XUA_SPDIF_RX_EN) || (XUA_ADAT_RX_EN)
chanend ?c_int, chanend ?c_int,
@@ -81,10 +89,17 @@ void XUA_Buffer_Ep(chanend c_aud_out,
#ifdef CHAN_BUFF_CTRL #ifdef CHAN_BUFF_CTRL
, chanend c_buff_ctrl , chanend c_buff_ctrl
#endif #endif
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) || defined(__DOXYGEN__) #if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) || defined(__DOYXGEN__)
, chanend c_audio_rate_change
#if (!XUA_USE_SW_PLL) || defined(__DOXYGEN__)
, client interface pll_ref_if i_pll_ref , client interface pll_ref_if i_pll_ref
#endif
#if (XUA_USE_SW_PLL) || defined(__DOXYGEN__)
, chanend c_swpll_update
#endif
#endif #endif
); );
/** Manage the data transfer between the USB audio buffer and the /** Manage the data transfer between the USB audio buffer and the
* Audio I/O driver. * Audio I/O driver.

30
lib_xua/api/xua_clocking.h
View File

@@ -6,6 +6,8 @@
#include <xs1.h> #include <xs1.h>
#include "sw_pll_wrapper.h"
interface pll_ref_if interface pll_ref_if
{ {
void toggle(); void toggle();
@@ -18,17 +20,18 @@ void PllRefPinTask(server interface pll_ref_if i_pll_ref, out port p_sync);
/** Clock generation and digital audio I/O handling. /** Clock generation and digital audio I/O handling.
* *
* \param c_spdif_rx channel connected to S/PDIF receive thread * \param c_spdif_rx channel connected to S/PDIF receive thread
* \param c_adat_rx channel connect to ADAT receive thread * \param c_adat_rx channel connect to ADAT receive thread
* \param i_pll_ref interface to taslk that outputs clock signal to drive external frequency synthesizer * \param i_pll_ref interface to taslk that outputs clock signal to drive external frequency synthesizer
* \param c_audio channel connected to the audio() thread * \param c_audio channel connected to the audio() thread
* \param c_clk_ctl channel connected to Endpoint0() for configuration of the * \param c_clk_ctl channel connected to Endpoint0() for configuration of the
* clock * clock
* \param c_clk_int channel connected to the decouple() thread for clock * \param c_clk_int channel connected to the decouple() thread for clock
* interrupts * interrupts
* \param c_audio_rate_change channel to notify of master clock change
* \param p_for_mclk_count_aud port used for counting mclk and providing a timestamp * \param p_for_mclk_count_aud port used for counting mclk and providing a timestamp
* \param c_sw_pll channel used to communicate with software PLL task
* *
* \param c_mclk_change channel to notify of master clock change
*/ */
void clockGen( streaming chanend ?c_spdif_rx, void clockGen( streaming chanend ?c_spdif_rx,
chanend ?c_adat_rx, chanend ?c_adat_rx,
@@ -36,7 +39,12 @@ void clockGen( streaming chanend ?c_spdif_rx,
chanend c_audio, chanend c_audio,
chanend c_clk_ctl, chanend c_clk_ctl,
chanend c_clk_int, chanend c_clk_int,
port ?p_for_mclk_count_aud, chanend c_audio_rate_change
chanend c_mclk_change); #if XUA_USE_SW_PLL
, port p_for_mclk_count_aud
, chanend c_sw_pll
#endif
);
#endif #endif

399
lib_xua/api/xua_conf_default.h
View File

@@ -1,4 +1,4 @@
// Copyright 2011-2023 XMOS LIMITED. // Copyright 2011-2024 XMOS LIMITED.
// This Software is subject to the terms of the XMOS Public Licence: Version 1. // This Software is subject to the terms of the XMOS Public Licence: Version 1.
/* /*
* @brief Defines relating to device configuration and customisation of lib_xua * @brief Defines relating to device configuration and customisation of lib_xua
@@ -11,56 +11,55 @@
#include "xua_conf.h" #include "xua_conf.h"
#endif #endif
/* Default tile arrangement */ /*
* Tile arrangement defines
*/
/** /**
* @brief Location (tile) of audio I/O. Default: 0 * @brief Location (tile) of audio I/O. Default: 0
*/ */
#ifndef AUDIO_IO_TILE #ifndef AUDIO_IO_TILE
#define AUDIO_IO_TILE (0) #define AUDIO_IO_TILE (0)
#endif #endif
/** /**
* @brief Location (tile) of audio I/O. Default: 0 * @brief Location (tile) of audio I/O. Default: 0
*/ */
#ifndef XUD_TILE #ifndef XUD_TILE
#define XUD_TILE (0) #define XUD_TILE (0)
#endif #endif
/** /**
* @brief Location (tile) of MIDI I/O. Default: AUDIO_IO_TILE * @brief Location (tile) of MIDI I/O. Default: AUDIO_IO_TILE
*/ */
#ifndef MIDI_TILE #ifndef MIDI_TILE
#define MIDI_TILE AUDIO_IO_TILE #define MIDI_TILE AUDIO_IO_TILE
#endif #endif
/** /**
* @brief Location (tile) of SPDIF Tx. Default: AUDIO_IO_TILE * @brief Location (tile) of SPDIF Tx. Default: AUDIO_IO_TILE
*/ */
#ifndef SPDIF_TX_TILE #ifndef SPDIF_TX_TILE
#define SPDIF_TX_TILE AUDIO_IO_TILE #define SPDIF_TX_TILE AUDIO_IO_TILE
#endif #endif
/** /**
* @brief Location (tile) of PDM Rx. Default: AUDIO_IO_TILE * @brief Location (tile) of PDM Rx. Default: AUDIO_IO_TILE
*/ */
#ifndef PDM_TILE #ifndef PDM_TILE
#define PDM_TILE AUDIO_IO_TILE #define PDM_TILE AUDIO_IO_TILE
#endif #endif
/** /**
* @brief Location (tile) of reference signal to CS2100. Default: AUDIO_IO_TILE * @brief Location (tile) of reference signal to CS2100. Default: AUDIO_IO_TILE
*/ */
#ifndef PLL_REF_TILE #ifndef PLL_REF_TILE
#define PLL_REF_TILE AUDIO_IO_TILE #define PLL_REF_TILE AUDIO_IO_TILE
#endif #endif
/** /*
* @brief Disable USB functionalty just leaving AudioHub * Channel based defines
*/ */
#ifndef XUA_USB_EN
#define XUA_USB_EN (1)
#endif
/** /**
* @brief Number of input channels (device to host). Default: NONE (Must be defined by app) * @brief Number of input channels (device to host). Default: NONE (Must be defined by app)
@@ -79,18 +78,57 @@
#endif #endif
/** /**
* @brief Number of DSD output channels. Default: 0 (disabled) * @brief Number of PDM microphones in the design.
*
* Default: 0
*/
#ifndef XUA_NUM_PDM_MICS
#define XUA_NUM_PDM_MICS (0)
#endif
/**
* @brief Number of DSD output channels.
*
* Default: 0 (disabled)
*/ */
#if defined(DSD_CHANS_DAC) && (DSD_CHANS_DAC != 0) #if defined(DSD_CHANS_DAC) && (DSD_CHANS_DAC != 0)
#if defined(NATIVE_DSD) && (NATIVE_DSD == 0) #if defined(NATIVE_DSD) && (NATIVE_DSD == 0)
#undef NATIVE_DSD #undef NATIVE_DSD
#else #else
#define NATIVE_DSD (1) /* Always enable Native DSD when DSD mode is enabled */ #define NATIVE_DSD 1 /* Always enable Native DSD when DSD mode is enabled */
#endif #endif
#else #else
#define DSD_CHANS_DAC (0) #define DSD_CHANS_DAC 0
#endif #endif
/**
* @brief Number of I2S channesl to DAC/CODEC. Must be a multiple of 2.
*
* Default: NONE (Must be defined by app)
*/
#ifndef I2S_CHANS_DAC
#error I2S_CHANS_DAC not defined
#define I2S_CHANS_DAC 2 /* Define anyway for doxygen */
#else
#define I2S_WIRES_DAC (I2S_CHANS_DAC / I2S_CHANS_PER_FRAME)
#endif
/**
* @brief Number of I2S channels from ADC/CODEC. Must be a multiple of 2.
*
* Default: NONE (Must be defined by app)
*/
#ifndef I2S_CHANS_ADC
#error I2S_CHANS_ADC not defined
#define I2S_CHANS_ADC 2 /* Define anyway for doxygen */
#else
#define I2S_WIRES_ADC (I2S_CHANS_ADC / I2S_CHANS_PER_FRAME)
#endif
/*
* Defines relating to the interface to external audio hardware i.e. DAC/ADC
*/
#define XUA_PCM_FORMAT_I2S (0) #define XUA_PCM_FORMAT_I2S (0)
#define XUA_PCM_FORMAT_TDM (1) #define XUA_PCM_FORMAT_TDM (1)
/** /**
@@ -103,7 +141,7 @@
#error Bad value for XUA_PCM_FORMAT #error Bad value for XUA_PCM_FORMAT
#endif #endif
#else #else
#define XUA_PCM_FORMAT XUA_PCM_FORMAT_I2S #define XUA_PCM_FORMAT XUA_PCM_FORMAT_I2S
#endif #endif
/** /**
@@ -114,89 +152,12 @@
**/ **/
#ifndef I2S_CHANS_PER_FRAME #ifndef I2S_CHANS_PER_FRAME
#if (XUA_PCM_FORMAT == XUA_PCM_FORMAT_TDM) #if (XUA_PCM_FORMAT == XUA_PCM_FORMAT_TDM)
#define I2S_CHANS_PER_FRAME (8) #define I2S_CHANS_PER_FRAME 8
#else #else
#define I2S_CHANS_PER_FRAME (2) #define I2S_CHANS_PER_FRAME 2
#endif #endif
#endif #endif
/**
* @brief Number of IS2 channesl to DAC/CODEC. Must be a multiple of 2.
*
* Default: NONE (Must be defined by app)
*/
#ifndef I2S_CHANS_DAC
#error I2S_CHANS_DAC not defined
#define I2S_CHANS_DAC 2 /* Define anyway for doxygen */
#else
#define I2S_WIRES_DAC (I2S_CHANS_DAC / I2S_CHANS_PER_FRAME)
#endif
/**
* @brief Number of I2S channels from ADC/CODEC. Must be a multiple of 2.
*
* Default: NONE (Must be defined by app)
*/
#ifndef I2S_CHANS_ADC
#error I2S_CHANS_ADC not defined
#define I2S_CHANS_ADC 2 /* Define anyway for doxygen */
#else
#define I2S_WIRES_ADC (I2S_CHANS_ADC / I2S_CHANS_PER_FRAME)
#endif
/**
* @brief Ratio of the I2S sample rate to the USB Audio sample rate. Up and
* down-sampling will be enabled as necessary when the rates differ.
*
* Default: 1 i.e. I2S and USB Audio are running at the same sample rate.
*/
#ifndef AUD_TO_USB_RATIO
#define AUD_TO_USB_RATIO (1)
#else
#if (AUD_TO_USB_RATIO != 3) && (AUD_TO_USB_RATIO != 1)
#error Unsupported I2S to USB Audio sample rate ratio
#endif
#endif
/**
* @brief Ratio of the I2S sample rate to the PDM microphone decimator sample
* rate.
*
* Default: 1 i.e. I2S and PDM microphone decimators are running at the same sample rate.
*/
#ifndef AUD_TO_MICS_RATIO
#define AUD_TO_MICS_RATIO (1)
#else
#if (AUD_TO_MICS_RATIO != 3) && (AUD_TO_MICS_RATIO != 1)
#error Unsupported I2S to PDM microphone decimator sample rate ratio
#endif
#endif
/**
* @brief Only downsample one channel per input I2S frame.
*
* Default: 0 i.e. mono mode is disabled, all input channels will be downsampled.
*/
#ifndef I2S_DOWNSAMPLE_MONO_IN
#define I2S_DOWNSAMPLE_MONO_IN (0)
#endif
/**
* @brief Number of incoming (device to host) I2S channels to downsample.
*
* Default: The number of I2S incoming channels, or half this if mono downsampling is enabled.
*/
#if (I2S_DOWNSAMPLE_MONO_IN == 1)
#define I2S_DOWNSAMPLE_CHANS_IN (I2S_CHANS_ADC / 2)
#if ((I2S_DOWNSAMPLE_FACTOR_IN > 1) && (XUA_PCM_FORMAT == XUA_PCM_FORMAT_TDM))
#error Mono I2S input downsampling is not avaliable in TDM mode
#endif
#else
#define I2S_DOWNSAMPLE_CHANS_IN I2S_CHANS_ADC
#endif
/** /**
* @brief Number of bits per channel for I2S/TDM. Supported values: 16/32-bit. * @brief Number of bits per channel for I2S/TDM. Supported values: 16/32-bit.
* *
@@ -211,21 +172,82 @@
#endif #endif
/** /**
* @brief Max supported sample frequency for device (Hz). Default: 192000 * @brief Ratio of the I2S sample rate to the USB Audio sample rate. Up and
* down-sampling will be enabled as necessary when the rates differ.
*
* Default: 1 i.e. I2S and USB Audio are running at the same sample rate.
*/
#ifndef AUD_TO_USB_RATIO
#define AUD_TO_USB_RATIO (1)
#else
#if (AUD_TO_USB_RATIO != 3) && (AUD_TO_USB_RATIO != 1)
#error Unsupported I2S to USB Audio sample rate ratio
#endif
#endif
/**
* @brief Ratio of the I2S sample rate to the PDM microphone decimator sample
* rate.
*
* Default: 1 i.e. I2S and PDM microphone decimators are running at the same sample rate.
*/
#ifndef AUD_TO_MICS_RATIO
#define AUD_TO_MICS_RATIO (1)
#else
#if (AUD_TO_MICS_RATIO != 3) && (AUD_TO_MICS_RATIO != 1)
#error Unsupported I2S to PDM microphone decimator sample rate ratio
#endif
#endif
/**
* @brief Only downsample one channel per input I2S frame.
*
* Default: 0 i.e. mono mode is disabled, all input channels will be downsampled.
*/
#ifndef I2S_DOWNSAMPLE_MONO_IN
#define I2S_DOWNSAMPLE_MONO_IN (0)
#endif
/**
* @brief Number of incoming (device to host) I2S channels to downsample.
*
* Default: The number of I2S incoming channels, or half this if mono downsampling is enabled.
*/
#if (I2S_DOWNSAMPLE_MONO_IN == 1)
#define I2S_DOWNSAMPLE_CHANS_IN (I2S_CHANS_ADC / 2)
#if ((I2S_DOWNSAMPLE_FACTOR_IN > 1) && (XUA_PCM_FORMAT == XUA_PCM_FORMAT_TDM))
#error Mono I2S input downsampling is not avaliable in TDM mode
#endif
#else
#define I2S_DOWNSAMPLE_CHANS_IN I2S_CHANS_ADC
#endif
/*
* Clocking related defines
*/
/**
* @brief Max supported sample frequency for device (Hz).
*
* Default: 192000Hz
*/ */
#ifndef MAX_FREQ #ifndef MAX_FREQ
#define MAX_FREQ (192000) #define MAX_FREQ (192000)
#endif #endif
/** /**
* @brief Min supported sample frequency for device (Hz). Default 44100 * @brief Min supported sample frequency for device (Hz).
*
* Default: 44100Hz
*/ */
#ifndef MIN_FREQ #ifndef MIN_FREQ
#define MIN_FREQ (44100) #define MIN_FREQ (44100)
#endif #endif
/** /**
* @brief Master clock defines for 44100 rates (in Hz). Default: NONE (Must be defined by app) * @brief Master clock defines for 44100 rates (in Hz).
*
* Default: NONE (Must be defined by app)
*/ */
#ifndef MCLK_441 #ifndef MCLK_441
#error MCLK_441 not defined #error MCLK_441 not defined
@@ -233,13 +255,29 @@
#endif #endif
/** /**
* @brief Master clock defines for 48000 rates (in Hz). Default: NONE (Must be defined by app) * @brief Master clock defines for 48000 rates (in Hz).
*
* Default: NONE (Must be defined by app)
*/ */
#ifndef MCLK_48 #ifndef MCLK_48
#error MCLK_48 not defined #error MCLK_48 not defined
#define MCLK_48 (256 * 48000) /* Define anyway for doygen */ #define MCLK_48 (256 * 48000) /* Define anyway for doygen */
#endif #endif
/**
* @brief Enable/disable the use of the secondary/application PLL for generating and recovering master-clocks.
* Only available on xcore.ai devices.
*
* Default: Enabled (for xcore.ai devices)
*/
#ifndef XUA_USE_SW_PLL
#if defined(__XS3A__)
#define XUA_USE_SW_PLL (1)
#else
#define XUA_USE_SW_PLL (0)
#endif
#endif
/** /**
* @brief Default device sample frequency. A safe default should be used. * @brief Default device sample frequency. A safe default should be used.
* *
@@ -249,10 +287,25 @@
#define DEFAULT_FREQ (MIN_FREQ) #define DEFAULT_FREQ (MIN_FREQ)
#endif #endif
/* Audio Class Defines */ #define DEFAULT_MCLK (((DEFAULT_FREQ % 7350) == 0) ? MCLK_441 : MCLK_48)
/** /**
* @brief USB Audio Class Version. * @brief Defines whether XMOS device runs as master (i.e. drives LR and Bit clocks)
*
* 0: XMOS is I2S master. 1: CODEC is I2s master.
*
* Default: 0 (XMOS is master)
*/
#ifndef CODEC_MASTER
#define CODEC_MASTER (0)
#endif
/*
* Audio Class defines
*/
/**
* @brief USB Audio Class Version
* *
* Default: 2 (Audio Class version 2.0) * Default: 2 (Audio Class version 2.0)
*/ */
@@ -261,9 +314,9 @@
#endif #endif
/** /**
* @brief Whether or not to fall back to Audio Class 1.0 in USB Full-speed. * @brief Enable/disable fall back to Audio Class 1.0 in USB Full-speed.
* *
* Default: 0 (Disabled i.e. do not fall back to UAC 1.0 * Default: Disabled
*/ */
#ifndef AUDIO_CLASS_FALLBACK #ifndef AUDIO_CLASS_FALLBACK
#define AUDIO_CLASS_FALLBACK (0) #define AUDIO_CLASS_FALLBACK (0)
@@ -278,7 +331,7 @@
#if (AUDIO_CLASS == 2) #if (AUDIO_CLASS == 2)
/* Whether to run in Audio Class 2.0 mode in USB Full-speed */ /* Whether to run in Audio Class 2.0 mode in USB Full-speed */
#if !defined(FULL_SPEED_AUDIO_2) && (AUDIO_CLASS_FALLBACK == 0) #if !defined(FULL_SPEED_AUDIO_2) && (AUDIO_CLASS_FALLBACK == 0)
#define FULL_SPEED_AUDIO_2 (1) /* Default to falling back to UAC2 */ #define FULL_SPEED_AUDIO_2 1 /* Default to falling back to UAC2 */
#endif #endif
#endif #endif
@@ -295,16 +348,17 @@
#error AUDIO_CLASS set to 1 and FULL_SPEED_AUDIO_2 enabled! #error AUDIO_CLASS set to 1 and FULL_SPEED_AUDIO_2 enabled!
#endif #endif
/*
/* Feature defines */ * Feature defines
*/
/** /**
* @brief Number of PDM microphones in the design. * @brief Disable USB functionalty just leaving AudioHub
* *
* Default: None * Default: Enabled
*/ */
#ifndef XUA_NUM_PDM_MICS #ifndef XUA_USB_EN
#define XUA_NUM_PDM_MICS (0) #define XUA_USB_EN (1)
#endif #endif
/** /**
@@ -318,18 +372,14 @@
#endif #endif
/** /**
* @brief Size of a frame of microphone data samples. * @brief Size of a frame of microphone data samples. Default: 1
*
* Default: 1
*/ */
#ifndef XUA_MIC_FRAME_SIZE #ifndef XUA_MIC_FRAME_SIZE
#define XUA_MIC_FRAME_SIZE (1) #define XUA_MIC_FRAME_SIZE (1)
#endif #endif
/** /**
* @brief Enable MIDI functionality including buffering, descriptors etc. * @brief Enable MIDI functionality including buffering, descriptors etc. Default: DISABLED
*
* Default: 0 (Disabled)
*/ */
#ifndef MIDI #ifndef MIDI
#define MIDI (0) #define MIDI (0)
@@ -350,7 +400,7 @@
* @brief Enables SPDIF Tx. Default: 0 (Disabled) * @brief Enables SPDIF Tx. Default: 0 (Disabled)
*/ */
#ifndef XUA_SPDIF_TX_EN #ifndef XUA_SPDIF_TX_EN
#define XUA_SPDIF_TX_EN (0) #define XUA_SPDIF_TX_EN (0)
#endif #endif
/** /**
@@ -359,16 +409,14 @@
* Default: 0 (i.e. channels 0 & 1) * Default: 0 (i.e. channels 0 & 1)
* */ * */
#ifndef SPDIF_TX_INDEX #ifndef SPDIF_TX_INDEX
#define SPDIF_TX_INDEX (0) #define SPDIF_TX_INDEX (0)
#endif #endif
/** /**
* @brief Enables ADAT Tx. * @brief Enables ADAT Tx. Default: 0 (Disabled)
*
* Default: 0 (Disabled)
*/ */
#ifndef XUA_ADAT_TX_EN #ifndef XUA_ADAT_TX_EN
#define XUA_ADAT_TX_EN (0) #define XUA_ADAT_TX_EN (0)
#endif #endif
/** /**
@@ -377,25 +425,21 @@
* Default: 0 (i.e. channels [0:7]) * Default: 0 (i.e. channels [0:7])
* */ * */
#ifndef ADAT_TX_INDEX #ifndef ADAT_TX_INDEX
#define ADAT_TX_INDEX (0) #define ADAT_TX_INDEX (0)
#endif #endif
/** /**
* @brief Enables SPDIF Rx. * @brief Enables SPDIF Rx. Default: 0 (Disabled)
*
* Default: 0 (Disabled)
*/ */
#ifndef XUA_SPDIF_RX_EN #ifndef XUA_SPDIF_RX_EN
#define XUA_SPDIF_RX_EN (0) #define XUA_SPDIF_RX_EN (0)
#endif #endif
/** /**
* @brief Enables ADAT Rx. * @brief Enables ADAT Rx. Default: 0 (Disabled)
*
* Default: 0 (Disabled)
*/ */
#ifndef XUA_ADAT_RX_EN #ifndef XUA_ADAT_RX_EN
#define XUA_ADAT_RX_EN (0) #define XUA_ADAT_RX_EN (0)
#endif #endif
/** /**
@@ -450,20 +494,11 @@
* Default: 1 (Enabled) * Default: 1 (Enabled)
*/ */
#if !defined(XUA_DFU_EN) #if !defined(XUA_DFU_EN)
#define XUA_DFU_EN (1) #define XUA_DFU_EN (1)
#elif defined(XUA_DFU_EN) && (XUA_DFU_EN == 0) #elif defined(XUA_DFU_EN) && (XUA_DFU_EN == 0)
#undef XUA_DFU_EN #undef XUA_DFU_EN
#endif #endif
/**
* @brief Use a QSPI (rather than SPI) flash for DFU (and boot)
*
* Default: 1 (True i.e use QSPI flash)
*/
#if !defined(XUA_QUAD_SPI_FLASH)
#define XUA_QUAD_SPI_FLASH (1)
#endif
/** /**
* @brief Enable HID playback controls functionality. * @brief Enable HID playback controls functionality.
* *
@@ -472,7 +507,7 @@
* Default 0 (Disabled) * Default 0 (Disabled)
*/ */
#ifndef HID_CONTROLS #ifndef HID_CONTROLS
#define HID_CONTROLS (0) #define HID_CONTROLS (0)
#endif #endif
/** /**
@@ -488,12 +523,11 @@
* You must also supply your own function to deal with the HID endpoint(s) * You must also supply your own function to deal with the HID endpoint(s)
* in this case. * in this case.
*/ */
#if( 0 < HID_CONTROLS ) #if (HID_CONTROLS) || defined (__DOXYGEN__)
#define XUA_HID_ENABLED (1) #define XUA_HID_ENABLED (1)
#define XUA_OR_STATIC_HID_ENABLED (1) #define XUA_OR_STATIC_HID_ENABLED (1)
#endif #endif
#if defined(__static_hid_report_h_exists__) #if defined(__static_hid_report_h_exists__)
#define XUA_OR_STATIC_HID_ENABLED (1) #define XUA_OR_STATIC_HID_ENABLED (1)
#endif #endif
@@ -506,18 +540,7 @@
* Default 0 (Disabled) * Default 0 (Disabled)
*/ */
#ifndef HID_OUT_REQUIRED #ifndef HID_OUT_REQUIRED
#define HID_OUT_REQUIRED (0) #define HID_OUT_REQUIRED (0)
#endif
/**
* @brief Defines whether XMOS device runs as master (i.e. drives LR and Bit clocks)
*
* 0: XMOS is I2S master. 1: CODEC is I2s master.
*
* Default: 0 (XMOS is master)
*/
#ifndef CODEC_MASTER
#define CODEC_MASTER (0)
#endif #endif
/** /**
@@ -526,7 +549,7 @@
* Default: "" * Default: ""
*/ */
#ifndef SERIAL_STR #ifndef SERIAL_STR
#define SERIAL_STR "" #define SERIAL_STR ""
#endif #endif
/** /**
@@ -535,7 +558,7 @@
* Default: "XMOS" * Default: "XMOS"
*/ */
#ifndef VENDOR_STR #ifndef VENDOR_STR
#define VENDOR_STR "XMOS" #define VENDOR_STR "XMOS"
#endif #endif
/** /**
@@ -544,7 +567,7 @@
* Default: 0x20B1 (XMOS) * Default: 0x20B1 (XMOS)
*/ */
#ifndef VENDOR_ID #ifndef VENDOR_ID
#define VENDOR_ID (0x20B1) #define VENDOR_ID (0x20B1)
#endif #endif
/** /**
@@ -586,7 +609,7 @@
*/ */
#if (AUDIO_CLASS == 1) || (AUDIO_CLASS_FALLBACK) || defined(__DOXYGEN__) #if (AUDIO_CLASS == 1) || (AUDIO_CLASS_FALLBACK) || defined(__DOXYGEN__)
#ifndef PID_AUDIO_1 #ifndef PID_AUDIO_1
#define PID_AUDIO_1 (0x0003) #define PID_AUDIO_1 (0x0003)
#endif #endif
#endif #endif
@@ -596,28 +619,28 @@
* Default: 0x0002 * Default: 0x0002
*/ */
#ifndef PID_AUDIO_2 #ifndef PID_AUDIO_2
#define PID_AUDIO_2 (0x0002) #define PID_AUDIO_2 (0x0002)
#endif #endif
/** /**
* @brief Device firmware version number in Binary Coded Decimal format: 0xJJMN where JJ: major, M: minor, N: sub-minor version number. * @brief Device firmware version number in Binary Coded Decimal format: 0xJJMN where JJ: major, M: minor, N: sub-minor version number.
*/ */
#ifndef BCD_DEVICE_J #ifndef BCD_DEVICE_J
#define BCD_DEVICE_J (1) #define BCD_DEVICE_J (1)
#endif #endif
/** /**
* @brief Device firmware version number in Binary Coded Decimal format: 0xJJMN where JJ: major, M: minor, N: sub-minor version number. * @brief Device firmware version number in Binary Coded Decimal format: 0xJJMN where JJ: major, M: minor, N: sub-minor version number.
*/ */
#ifndef BCD_DEVICE_M #ifndef BCD_DEVICE_M
#define BCD_DEVICE_M (2) #define BCD_DEVICE_M (2)
#endif #endif
/** /**
* @brief Device firmware version number in Binary Coded Decimal format: 0xJJMN where JJ: major, M: minor, N: sub-minor version number. * @brief Device firmware version number in Binary Coded Decimal format: 0xJJMN where JJ: major, M: minor, N: sub-minor version number.
*/ */
#ifndef BCD_DEVICE_N #ifndef BCD_DEVICE_N
#define BCD_DEVICE_N (0) #define BCD_DEVICE_N (0)
#endif #endif
/** /**
@@ -1021,7 +1044,7 @@
* Default: 1 (Enabled) * Default: 1 (Enabled)
*/ */
#ifndef OUTPUT_VOLUME_CONTROL #ifndef OUTPUT_VOLUME_CONTROL
#define OUTPUT_VOLUME_CONTROL (1) #define OUTPUT_VOLUME_CONTROL (1)
#endif #endif
/** /**
@@ -1030,7 +1053,7 @@
* Default: 1 (Enabled) * Default: 1 (Enabled)
*/ */
#ifndef INPUT_VOLUME_CONTROL #ifndef INPUT_VOLUME_CONTROL
#define INPUT_VOLUME_CONTROL (1) #define INPUT_VOLUME_CONTROL (1)
#endif #endif
/* Power */ /* Power */
@@ -1072,7 +1095,7 @@
* Default: 0 (Disabled) * Default: 0 (Disabled)
*/ */
#ifndef MIXER #ifndef MIXER
#define MIXER (0) #define MIXER (0)
#endif #endif
/** /**
@@ -1082,11 +1105,11 @@
*/ */
#if (MIXER) #if (MIXER)
#ifndef MAX_MIX_COUNT #ifndef MAX_MIX_COUNT
#define MAX_MIX_COUNT (8) #define MAX_MIX_COUNT (8)
#endif #endif
#else #else
#ifndef MAX_MIX_COUNT #ifndef MAX_MIX_COUNT
#define MAX_MIX_COUNT (0) #define MAX_MIX_COUNT (0)
#endif #endif
#endif #endif
@@ -1098,7 +1121,7 @@
* Default: 18 * Default: 18
*/ */
#ifndef MIX_INPUTS #ifndef MIX_INPUTS
#define MIX_INPUTS (18) #define MIX_INPUTS (18)
#endif #endif
/* Volume processing defines */ /* Volume processing defines */
@@ -1110,7 +1133,7 @@
* Default: 0x8100 (-127db) * Default: 0x8100 (-127db)
*/ */
#ifndef MIN_VOLUME #ifndef MIN_VOLUME
#define MIN_VOLUME (0x8100) #define MIN_VOLUME (0x8100)
#endif #endif
@@ -1120,7 +1143,7 @@
* Default: 0x0000 (0db) * Default: 0x0000 (0db)
*/ */
#ifndef MAX_VOLUME #ifndef MAX_VOLUME
#define MAX_VOLUME (0x0000) #define MAX_VOLUME (0x0000)
#endif #endif
/** /**
@@ -1129,7 +1152,7 @@
* Default: 0x100 (1db) * Default: 0x100 (1db)
*/ */
#ifndef VOLUME_RES #ifndef VOLUME_RES
#define VOLUME_RES (0x100) #define VOLUME_RES (0x100)
#endif #endif
/** /**
@@ -1139,7 +1162,7 @@
* Default: 0x8100 (-127db) * Default: 0x8100 (-127db)
*/ */
#ifndef MIN_MIXER_VOLUME #ifndef MIN_MIXER_VOLUME
#define MIN_MIXER_VOLUME (0x8100) #define MIN_MIXER_VOLUME (0x8100)
#endif #endif
/** /**
@@ -1148,7 +1171,7 @@
* Default: 0x0000 (0db) * Default: 0x0000 (0db)
*/ */
#ifndef MAX_MIXER_VOLUME #ifndef MAX_MIXER_VOLUME
#define MAX_MIXER_VOLUME (0x0000) #define MAX_MIXER_VOLUME (0x0000)
#endif #endif
/** /**
@@ -1157,36 +1180,36 @@
* Default: 0x100 (1db) * Default: 0x100 (1db)
*/ */
#ifndef VOLUME_RES_MIXER #ifndef VOLUME_RES_MIXER
#define VOLUME_RES_MIXER (0x100) #define VOLUME_RES_MIXER (0x100)
#endif #endif
/* Handle out volume control in the mixer - enabled by default if mixer enabled */ /* Handle out volume control in the mixer - enabled by default */
#ifndef OUT_VOLUME_IN_MIXER #ifndef OUT_VOLUME_IN_MIXER
#if MIXER #if MIXER
#define OUT_VOLUME_IN_MIXER (1) #define OUT_VOLUME_IN_MIXER (1)
#else #else
#define OUT_VOLUME_IN_MIXER (0) #define OUT_VOLUME_IN_MIXER (0)
#endif #endif
#endif #endif
/* Apply out volume controls after the mix. Only relevant when OUT_VOLUME_IN_MIXER enabled. Enabled by default */ /* Apply out volume controls after the mix. Only relevant when OUT_VOLUME_IN_MIXER enabled. Enabled by default */
#ifndef OUT_VOLUME_AFTER_MIX #ifndef OUT_VOLUME_AFTER_MIX
#define OUT_VOLUME_AFTER_MIX (1) #define OUT_VOLUME_AFTER_MIX (1)
#endif #endif
/* Handle in volume control in the mixer - disabled by default */ /* Handle in volume control in the mixer - disabled by default */
#ifndef IN_VOLUME_IN_MIXER #ifndef IN_VOLUME_IN_MIXER
#define IN_VOLUME_IN_MIXER (0) #define IN_VOLUME_IN_MIXER (0)
#endif #endif
/* Apply in volume controls after the mix. Only relevant when IN_VOLUMNE_IN MIXER enabled. Enabled by default */ /* Apply in volume controls after the mix. Only relevant when IN_VOLUMNE_IN MIXER enabled. Enabled by default */
#ifndef IN_VOLUME_AFTER_MIX #ifndef IN_VOLUME_AFTER_MIX
#define IN_VOLUME_AFTER_MIX (1) #define IN_VOLUME_AFTER_MIX (1)
#endif #endif
/* Always enable explicit feedback EP, even when input stream is present */ /* Always enable explicit feedback EP, even when input stream is present */
#ifndef UAC_FORCE_FEEDBACK_EP #ifndef UAC_FORCE_FEEDBACK_EP
#define UAC_FORCE_FEEDBACK_EP (1) #define UAC_FORCE_FEEDBACK_EP (1)
#endif #endif
#if (defined(UAC_FORCE_FEEDBACK_EP) && UAC_FORCE_FEEDBACK_EP == 0) #if (defined(UAC_FORCE_FEEDBACK_EP) && UAC_FORCE_FEEDBACK_EP == 0)
@@ -1194,9 +1217,9 @@
#endif #endif
/* Synchronisation defines */ /* Synchronisation defines */
#define XUA_SYNCMODE_ASYNC (1) // USB_ENDPOINT_SYNCTYPE_ASYNC #define XUA_SYNCMODE_ASYNC (1) // USB_ENDPOINT_SYNCTYPE_ASYNC
#define XUA_SYNCMODE_ADAPT (2) // USB_ENDPOINT_SYNCTYPE_ADAPT #define XUA_SYNCMODE_ADAPT (2) // USB_ENDPOINT_SYNCTYPE_ADAPT
#define XUA_SYNCMODE_SYNC (3) // USB_ENDPOINT_SYNCTYPE_SYNC #define XUA_SYNCMODE_SYNC (3) // USB_ENDPOINT_SYNCTYPE_SYNC
#ifndef XUA_SYNCMODE #ifndef XUA_SYNCMODE
#define XUA_SYNCMODE XUA_SYNCMODE_ASYNC #define XUA_SYNCMODE XUA_SYNCMODE_ASYNC
@@ -1276,6 +1299,8 @@ enum USBEndpointNumber_Out
#endif /* __ASSEMBLER__ */ #endif /* __ASSEMBLER__ */
#define AUDIO_STOP_FOR_DFU (0x12345678) #define AUDIO_STOP_FOR_DFU (0x12345678)
#define AUDIO_START_FROM_DFU (0x87654321)
#define AUDIO_REBOOT_FROM_DFU (0xa5a5a5a5)
/* Result of db_to_mult(MAX_VOLUME, 8, 29) */ /* Result of db_to_mult(MAX_VOLUME, 8, 29) */
#define MAX_VOLUME_MULT (0x20000000) #define MAX_VOLUME_MULT (0x20000000)

1
lib_xua/doc/rst/api_defines.rst
View File

@@ -38,6 +38,7 @@ Frequencies and Clocks
.. doxygendefine:: DEFAULT_FREQ .. doxygendefine:: DEFAULT_FREQ
.. doxygendefine:: MCLK_441 .. doxygendefine:: MCLK_441
.. doxygendefine:: MCLK_48 .. doxygendefine:: MCLK_48
.. doxygendefine:: XUA_USE_SW_PLL
Audio Class Audio Class
----------- -----------

81
lib_xua/doc/rst/api_user_functions.rst
View File

@@ -1,74 +1,49 @@
Required User Function Definitions |newpage|
==================================
The following functions need to be defined by an application using the XMOS USB Audio framework. User Function Definitions
=========================
The following functions can be defined by an application using `lib_xua`.
.. note:: Default, empty, implementations of these functions are provided in `lib_xua`. These are marked
as weak symbols so the application can simply define its own version of them.
External Audio Hardware Configuration Functions External Audio Hardware Configuration Functions
----------------------------------------------- -----------------------------------------------
.. c:function:: void AudioHwInit(chanend ?c_codec) The following functions can be optionally used by the design to configure external audio hardware.
As a minimum, in most applications, it is expected that a implementation of `AudioHwConfig()` will need
to be provided.
This function is called when the audio core starts after the .. doxygenfunction:: AudioHwInit
device boots up and should initialize the external audio harware e.g. clocking, DAC, ADC etc .. doxygenfunction:: AudioHwConfig
.. doxygenfunction:: AudioHwConfig_Mute
:param c_codec: An optional chanend that was original passed into .. doxygenfunction:: AudioHwConfig_UnMute
:c:func:`audio` that can be used to communicate
with other cores.
.. c:function:: void AudioHwConfig(unsigned samFreq, unsigned mclk, chanend ?c_codec, unsigned dsdMode, unsigned sampRes_DAC, unsigned sampRes_ADC) Audio Stream Start/Stop Functions
---------------------------------
This function is called when the audio core starts or changes
sample rate. It should configure the extenal audio hardware to run at the specified
sample rate given the supplied master clock frequency.
:param samFreq: The sample frequency in Hz that the hardware should be configured to (in Hz).
:param mclk: The master clock frequency that is required in Hz.
:param c_codec: An optional chanend that was original passed into
:c:func:`audio` that can be used to communicate
with other cores.
:param dsdMode: Signifies if the audio hardware should be configured for DSD operation
:param sampRes_DAC: The sample resolution of the DAC stream
:param sampRes_ADC: The sample resolution of the ADC stream
Audio Streaming Functions
-------------------------
The following functions can be optionally used by the design. They can be useful for mute lines etc. The following functions can be optionally used by the design. They can be useful for mute lines etc.
.. c:function:: void AudioStreamStart(void) .. doxygenfunction:: UserAudioStreamStart
.. doxygenfunction:: UserAudioStreamStop
.. doxygenfunction:: UserAudioInputStreamStart
.. doxygenfunction:: UserAudioInputStreamStop
.. doxygenfunction:: UserAudioOutputStreamStart
.. doxygenfunction:: UserAudioOutputStreamStop
This function is called when the audio stream from device to host Host Active Functions
starts. ---------------------
.. c:function:: void AudioStreamStop(void)
This function is called when the audio stream from device to host stops.
Host Active
-----------
The following function can be used to signal that the device is connected to a valid host. The following function can be used to signal that the device is connected to a valid host.
This is called on a change in state. .. doxygenfunction:: UserHostActive
.. c:function:: void AudioStreamStart(int active)
:param active: Indicates if the host is active or not. 1 for active else 0.
HID Controls HID Controls
------------ ------------
The following function is called when the device wishes to read physical user input (buttons etc). The following function is called when the device wishes to read physical user input (buttons etc).
The function should write relevant HID bits into this array. The bit ordering and functionality is defined by the HID report descriptor used.
.. c:function:: void UserReadHIDButtons(unsigned char hidData[]) .. doxygenfunction:: UserHIDGetData
:param hidData: The function should write relevant HID bits into this array. The bit ordering and functionality is defined by the HID report descriptor used.

12
lib_xua/doc/rst/opt_sync.rst
View File

@@ -39,8 +39,11 @@ Setting the synchronisation mode of the device is done using the define in :ref:
- USB synchronisation mode - USB synchronisation mode
- ``XUA_SYNCMODE_ASYNC`` - ``XUA_SYNCMODE_ASYNC``
When operating in synchronous mode an external Cirrus Logic CS2100 device is required for master clock When operating in synchronous mode a local master clock must be generated that is synchronised to the incoming
generation. The codebase expects to drive a synchronisation signal to this external device SoF rate from USB. Either an external Cirrus Logic CS2100 device is required for this purpose
or, on xcore.ai devices, the on-chip application PLL may be used via lib_sw_pll.
In the case of using the CS2100, the codebase expects to drive a synchronisation signal to this external device
as a reference.
The programmer should ensure the define in :ref:`opt_sync_ref_defines` is set appropriately. The programmer should ensure the define in :ref:`opt_sync_ref_defines` is set appropriately.
@@ -56,8 +59,11 @@ The programmer should ensure the define in :ref:`opt_sync_ref_defines` is set ap
* - ``PLL_REF_TILE`` * - ``PLL_REF_TILE``
- Tile location of reference to CS2100 device - Tile location of reference to CS2100 device
- ``AUDIO_IO_TILE`` - ``AUDIO_IO_TILE``
* - ``XUA_USE_SW_PLL``
- Whether or not to use sw_pll to recover the clock (xcore.ai only)
- 1 for xcore.ai targets. May be overridden to 0 in ``xua_conf.h``
The codebase expects this reference signal port to be defined in the application XN file as ``PORT_PLL_REF``. The codebase expects the CS2100 reference signal port to be defined in the application XN file as ``PORT_PLL_REF``.
This may be a port of any bit-width, however, connection to bit[0] is assumed:: This may be a port of any bit-width, however, connection to bit[0] is assumed::
<Port Location="XS1_PORT_1A" Name="PORT_PLL_REF"/> <Port Location="XS1_PORT_1A" Name="PORT_PLL_REF"/>

2
lib_xua/doc/rst/xdoc.conf
View File

@@ -1,5 +1,5 @@
XMOSNEWSTYLE = 2 XMOSNEWSTYLE = 2
DOXYGEN_DIRS=../../api DOXYGEN_DIRS=../../api ../../src/core/user/audiostream ../../src/core/user/hostactive ../../src/core/user/hid ../../src/core/user/audiohw
SOURCE_INCLUDE_DIRS=../../../lib_xua SOURCE_INCLUDE_DIRS=../../../lib_xua
SPHINX_MASTER_DOC=lib_xua SPHINX_MASTER_DOC=lib_xua

3
lib_xua/lib_build_info.cmake
View File

@@ -14,6 +14,7 @@ set(LIB_INCLUDES api
src/core/support src/core/support
src/core/user src/core/user
src/core/user/audiostream src/core/user/audiostream
src/core/user/audiohw
src/core/user/hid src/core/user/hid
src/core/user/hostactive src/core/user/hostactive
src/hid src/hid
@@ -26,7 +27,7 @@ set(LIB_DEPENDENT_MODULES "lib_locks"
"lib_xassert" "lib_xassert"
"lib_xud" "lib_xud"
"lib_adat" "lib_adat"
"lib_sw_pll(develop)") "lib_sw_pll")
set(LIB_COMPILER_FLAGS -O3 -DREF_CLK_FREQ=100 -fasm-linenum -fcomment-asm) set(LIB_COMPILER_FLAGS -O3 -DREF_CLK_FREQ=100 -fasm-linenum -fcomment-asm)

2
lib_xua/module_build_info
View File

@@ -54,6 +54,7 @@ INCLUDE_DIRS = $(EXPORT_INCLUDE_DIRS) \
src/core/support \ src/core/support \
src/core/user \ src/core/user \
src/core/user/audiostream \ src/core/user/audiostream \
src/core/user/audiohw \
src/core/user/hid \ src/core/user/hid \
src/core/user/hostactive \ src/core/user/hostactive \
src/hid \ src/hid \
@@ -70,6 +71,7 @@ SOURCE_DIRS = src/core \
src/core/ports \ src/core/ports \
src/core/support \ src/core/support \
src/core/user/audiostream \ src/core/user/audiostream \
src/core/user/audiohw \
src/core/user/hostactive \ src/core/user/hostactive \
src/core/xuduser \ src/core/xuduser \
src/dfu \ src/dfu \

27
lib_xua/src/core/audiohub/xua_audiohub.xc
View File

@@ -20,6 +20,7 @@
#include "xua.h" #include "xua.h"
#include "audiohw.h"
#include "audioports.h" #include "audioports.h"
#include "mic_array_conf.h" #include "mic_array_conf.h"
#if (XUA_SPDIF_TX_EN) #if (XUA_SPDIF_TX_EN)
@@ -640,7 +641,9 @@ void XUA_AudioHub(chanend ?c_aud, clock ?clk_audio_mclk, clock ?clk_audio_bclk,
#endif #endif
#if (XUA_ADAT_RX_EN || XUA_SPDIF_RX_EN) #if (XUA_ADAT_RX_EN || XUA_SPDIF_RX_EN)
, chanend c_dig_rx , chanend c_dig_rx
, chanend c_mclk_change #endif
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC || XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN)
, chanend c_audio_rate_change
#endif #endif
#if (XUD_TILE != 0) && (AUDIO_IO_TILE == 0) && (XUA_DFU_EN == 1) #if (XUD_TILE != 0) && (AUDIO_IO_TILE == 0) && (XUA_DFU_EN == 1)
, server interface i_dfu ?dfuInterface , server interface i_dfu ?dfuInterface
@@ -800,15 +803,23 @@ void XUA_AudioHub(chanend ?c_aud, clock ?clk_audio_mclk, clock ?clk_audio_bclk,
} }
#endif #endif
/* Configure Clocking/CODEC/DAC/ADC for SampleFreq/MClk */ /* Configure Clocking/CODEC/DAC/ADC for SampleFreq/MClk */
AudioHwConfig(curFreq, mClk, dsdMode, curSamRes_DAC, curSamRes_ADC);
#if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN)
/* Notify clockgen of new mCLk */
c_mclk_change <: mClk;
c_mclk_change <: curFreq;
/* Wait for ACK back from clockgen to signal clocks all good */ /* User should mute audio hardware */
c_mclk_change :> int _; AudioHwConfig_Mute();
/* User code should configure audio harware for SampleFreq/MClk etc */
AudioHwConfig(curFreq, mClk, dsdMode, curSamRes_DAC, curSamRes_ADC);
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC || XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN)
/* Notify clockgen of new mCLk */
c_audio_rate_change <: mClk;
c_audio_rate_change <: curFreq;
/* Wait for ACK back from clockgen or ep_buffer to signal clocks all good */
c_audio_rate_change :> int _;
#endif #endif
/* User should unmute audio hardware */
AudioHwConfig_UnMute();
} }
if(!firstRun) if(!firstRun)

144
lib_xua/src/core/buffer/ep/ep_buffer.xc
View File

@@ -1,4 +1,4 @@
// Copyright 2011-2023 XMOS LIMITED. // Copyright 2011-2024 XMOS LIMITED.
// This Software is subject to the terms of the XMOS Public Licence: Version 1. // This Software is subject to the terms of the XMOS Public Licence: Version 1.
#include "xua.h" #include "xua.h"
#if XUA_USB_EN #if XUA_USB_EN
@@ -105,7 +105,12 @@ void XUA_Buffer(
#endif #endif
, chanend c_aud , chanend c_aud
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) #if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC)
, chanend c_audio_rate_change
#if(XUA_USE_SW_PLL)
, chanend c_sw_pll
#else
, client interface pll_ref_if i_pll_ref , client interface pll_ref_if i_pll_ref
#endif
#endif #endif
) )
{ {
@@ -141,7 +146,12 @@ void XUA_Buffer(
, c_buff_ctrl , c_buff_ctrl
#endif #endif
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) #if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC)
, i_pll_ref , c_audio_rate_change
#if(XUA_USE_SW_PLL)
, c_sw_pll
#else
, i_pll_ref
#endif
#endif #endif
); );
@@ -190,8 +200,13 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
#ifdef CHAN_BUFF_CTRL #ifdef CHAN_BUFF_CTRL
, chanend c_buff_ctrl , chanend c_buff_ctrl
#endif #endif
#if XUA_SYNCMODE == XUA_SYNCMODE_SYNC #if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC)
, chanend c_audio_rate_change
#if (XUA_USE_SW_PLL)
, chanend c_sw_pll
#else
, client interface pll_ref_if i_pll_ref , client interface pll_ref_if i_pll_ref
#endif
#endif #endif
) )
{ {
@@ -247,7 +262,7 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
#if (NUM_USB_CHAN_IN > 0) #if (NUM_USB_CHAN_IN > 0)
unsigned bufferIn = 1; unsigned bufferIn = 1;
#endif #endif
unsigned sofCount = 0; int sofCount = 0;
unsigned mod_from_last_time = 0; unsigned mod_from_last_time = 0;
#ifdef FB_TOLERANCE_TEST #ifdef FB_TOLERANCE_TEST
@@ -294,7 +309,6 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
unsigned iap_ea_native_interface_alt_setting = 0; unsigned iap_ea_native_interface_alt_setting = 0;
unsigned iap_ea_native_control_to_send = 0; unsigned iap_ea_native_control_to_send = 0;
unsigned iap_ea_native_incoming = 0; unsigned iap_ea_native_incoming = 0;
#endif #endif
#endif #endif
@@ -357,6 +371,24 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
#ifndef LOCAL_CLOCK_MARGIN #ifndef LOCAL_CLOCK_MARGIN
#define LOCAL_CLOCK_MARGIN (1000) #define LOCAL_CLOCK_MARGIN (1000)
#endif #endif
#if (XUA_USE_SW_PLL)
/* Setup the phase frequency detector */
const unsigned controller_rate_hz = 100;
const unsigned pfd_ppm_max = 2000; /* PPM range before we assume unlocked */
sw_pll_pfd_state_t sw_pll_pfd;
sw_pll_pfd_init(&sw_pll_pfd,
1, /* How often the PFD is invoked per call */
masterClockFreq / controller_rate_hz, /* pll ratio integer */
0, /* Assume precise timing of sampling */
pfd_ppm_max);
outuint(c_sw_pll, masterClockFreq);
outct(c_sw_pll, XS1_CT_END);
inuint(c_sw_pll); /* receive ACK */
inct(c_sw_pll);
#else /* XUA_USE_SW_PLL */
timer t_sofCheck; timer t_sofCheck;
unsigned timeLastEdge; unsigned timeLastEdge;
unsigned timeNextEdge; unsigned timeNextEdge;
@@ -365,6 +397,8 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
i_pll_ref.toggle(); i_pll_ref.toggle();
#endif #endif
#endif /* (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) */
while(1) while(1)
{ {
XUD_Result_t result; XUD_Result_t result;
@@ -427,7 +461,7 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
/* Reset FB */ /* Reset FB */
/* Note, Endpoint 0 will hold off host for a sufficient period to allow our feedback /* Note, Endpoint 0 will hold off host for a sufficient period to allow our feedback
* to stabilise (i.e. sofCount == 128 to fire) */ * to stabilise (i.e. sofCount == 128 to fire) */
sofCount = 1; sofCount = 0;
clocks = 0; clocks = 0;
clockcounter = 0; clockcounter = 0;
mod_from_last_time = 0; mod_from_last_time = 0;
@@ -450,7 +484,7 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
masterClockFreq = MCLK_441; masterClockFreq = MCLK_441;
} }
} }
#endif #endif /* (MAX_FREQ != MIN_FREQ) */
/* Ideally we want to wait for handshake (and pass back up) here. But we cannot keep this /* Ideally we want to wait for handshake (and pass back up) here. But we cannot keep this
* core locked, it must stay responsive to packets (MIDI etc) and SOFs. So, set a flag and check for * core locked, it must stay responsive to packets (MIDI etc) and SOFs. So, set a flag and check for
* handshake elsewhere */ * handshake elsewhere */
@@ -502,13 +536,13 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
} }
#endif #endif
/* Pass on sample freq change to decouple() via global flag (saves a chanend) */ /* Pass on sample freq change to decouple() via global flag (saves a chanend) */
/* Note: freqChange flags now used to communicate other commands also */ /* Note: freqChange_flag now used to communicate other commands also */
SET_SHARED_GLOBAL0(g_freqChange, cmd); /* Set command */ SET_SHARED_GLOBAL0(g_freqChange, cmd); /* Set command */
SET_SHARED_GLOBAL(g_freqChange_flag, cmd); /* Set Flag */ SET_SHARED_GLOBAL(g_freqChange_flag, cmd); /* Set Flag */
} }
break; break;
} }
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) #if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) && (!XUA_USE_SW_PLL)
case t_sofCheck when timerafter(timeNextEdge) :> void: case t_sofCheck when timerafter(timeNextEdge) :> void:
i_pll_ref.toggle(); i_pll_ref.toggle();
timeLastEdge = timeNextEdge; timeLastEdge = timeNextEdge;
@@ -523,28 +557,61 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
/* SOF notification from XUD_Manager() */ /* SOF notification from XUD_Manager() */
case inuint_byref(c_sof, u_tmp): case inuint_byref(c_sof, u_tmp):
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) #if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC)
/* This really could (should) be done in decouple. However, for a quick demo this is okay
* Decouple expects a 16:16 number in fixed point stored in the global g_speed */
unsigned usbSpeed; unsigned usbSpeed;
int framesPerSec;
GET_SHARED_GLOBAL(usbSpeed, g_curUsbSpeed); GET_SHARED_GLOBAL(usbSpeed, g_curUsbSpeed);
static int sofCount = 0; static int sofCount = 0;
#if (XUA_USE_SW_PLL)
/* Run PFD and sw_pll controller at 100Hz */
const int sofFreqDivider = (usbSpeed == XUD_SPEED_HS) ? (8000 / controller_rate_hz) : (1000 / controller_rate_hz);
#else /* (XUA_USE_SW_PLL) */
/* 1000 toggles per second for CS2100 reference -> 500 Hz */
const int toggleRateHz = 1000;
const int sofFreqDivider = (usbSpeed == XUD_SPEED_HS) ? (8000 / toggleRateHz) : (1000 / toggleRateHz);
#endif /* (XUA_USE_SW_PLL) */
framesPerSec = (usbSpeed == XUD_SPEED_HS) ? 8000 : 1000; sofCount++;
if (sofCount == sofFreqDivider)
clocks = ((int64_t) sampleFreq << 16) / framesPerSec;
asm volatile("stw %0, dp[g_speed]"::"r"(clocks));
sofCount += 1000;
if (sofCount == framesPerSec)
{ {
#if (XUA_USE_SW_PLL)
/* Grab port timer count, run through PFD and send to sw_pll */
unsigned short mclk_pt;
asm volatile("getts %0, res[%1]" : "=r" (mclk_pt) : "r" (p_off_mclk));
uint8_t first_loop = 0;
unsafe{
sw_pll_calc_error_from_port_timers(&sw_pll_pfd, &first_loop, mclk_pt, 0);
}
int error = 0;
if(!first_loop)
{
error = sw_pll_pfd.mclk_diff;
}
sw_pll_pfd.mclk_pt_last = mclk_pt;
/* Send error to sw_pll */
outuint(c_sw_pll, error);
outct(c_sw_pll, XS1_CT_END);
#else /* (XUA_USE_SW_PLL) */
/* Do toggle for CS2100 reference clock */
/* Port is accessed via interface to allow flexibilty with location */ /* Port is accessed via interface to allow flexibilty with location */
i_pll_ref.toggle(); i_pll_ref.toggle();
t_sofCheck :> timeLastEdge; t_sofCheck :> timeLastEdge;
sofCount = 0;
timeNextEdge = timeLastEdge + LOCAL_CLOCK_INCREMENT + LOCAL_CLOCK_MARGIN; timeNextEdge = timeLastEdge + LOCAL_CLOCK_INCREMENT + LOCAL_CLOCK_MARGIN;
#endif /* (XUA_USE_SW_PLL) */
sofCount = 0;
} }
/* This really could (should) be done in decouple. However, for a quick demo this is okay
* Decouple expects a 16:16 number in fixed point stored in the global g_speed */
const int framesPerSec = (usbSpeed == XUD_SPEED_HS) ? 8000 : 1000;
clocks = ((int64_t) sampleFreq << 16) / framesPerSec;
asm volatile("stw %0, dp[g_speed]"::"r"(clocks));
#elif (XUA_SYNCMODE == XUA_SYNCMODE_ASYNC) #elif (XUA_SYNCMODE == XUA_SYNCMODE_ASYNC)
/* NOTE our feedback will be wrong for a couple of SOF's after a SF change due to /* NOTE our feedback will be wrong for a couple of SOF's after a SF change due to
@@ -646,7 +713,6 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
clockcounter = 0; clockcounter = 0;
} }
#else #else
/* Assuming 48kHz from a 24.576 master clock (0.0407uS period) /* Assuming 48kHz from a 24.576 master clock (0.0407uS period)
* MCLK ticks per SOF = 125uS / 0.0407 = 3072 MCLK ticks per SOF. * MCLK ticks per SOF = 125uS / 0.0407 = 3072 MCLK ticks per SOF.
* expected Feedback is 48000/8000 = 6 samples. so 0x60000 in 16:16 format. * expected Feedback is 48000/8000 = 6 samples. so 0x60000 in 16:16 format.
@@ -691,7 +757,6 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
clocks < (expected_fb + FB_TOLERANCE)) clocks < (expected_fb + FB_TOLERANCE))
#endif #endif
{ {
int usb_speed;
asm volatile("stw %0, dp[g_speed]"::"r"(clocks)); // g_speed = clocks asm volatile("stw %0, dp[g_speed]"::"r"(clocks)); // g_speed = clocks
GET_SHARED_GLOBAL(usb_speed, g_curUsbSpeed); GET_SHARED_GLOBAL(usb_speed, g_curUsbSpeed);
@@ -897,8 +962,8 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
#endif #endif
#endif #endif
#if XUA_HID_ENABLED #if (XUA_HID_ENABLED)
/* HID Report Data */ /* HID Report Data */
case XUD_SetData_Select(c_hid, ep_hid, result): case XUD_SetData_Select(c_hid, ep_hid, result):
hid_ready_flag = 0U; hid_ready_flag = 0U;
unsigned reportTime; unsigned reportTime;
@@ -911,7 +976,7 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
#endif #endif
#ifdef MIDI #ifdef MIDI
/* Received word from MIDI thread - Check for ACK or Data */ /* Received word from MIDI thread - Check for ACK or Data */
case midi_get_ack_or_data(c_midi, is_ack, datum): case midi_get_ack_or_data(c_midi, is_ack, datum):
if (is_ack) if (is_ack)
{ {
@@ -963,6 +1028,33 @@ void XUA_Buffer_Ep(register chanend c_aud_out,
break; break;
#endif /* ifdef MIDI */ #endif /* ifdef MIDI */
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC)
case c_audio_rate_change :> u_tmp:
unsigned selected_mclk_rate = u_tmp;
c_audio_rate_change :> u_tmp; /* Sample rate is discarded as only care about mclk */
#if (XUA_USE_SW_PLL)
sw_pll_pfd_init(&sw_pll_pfd,
1, /* How often the PFD is invoked per call */
selected_mclk_rate / controller_rate_hz, /* pll muliplication ratio integer */
0, /* Assume precise timing of sampling */
pfd_ppm_max);
restart_sigma_delta(c_sw_pll, selected_mclk_rate);
/* Delay ACK until sw_pll says it is ready */
#else
c_audio_rate_change <: 0; /* ACK back to audio to release I2S immediately */
#endif /* XUA_USE_SW_PLL */
break;
#if (XUA_USE_SW_PLL)
/* This is fired when sw_pll has completed initialising a new mclk_rate */
case inuint_byref(c_sw_pll, u_tmp):
inct(c_sw_pll);
c_audio_rate_change <: 0; /* ACK back to audio to release */
break;
#endif /* (XUA_USE_SW_PLL) */
#endif /* (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) */
#ifdef IAP #ifdef IAP
/* Received word from iap thread - Check for ACK or Data */ /* Received word from iap thread - Check for ACK or Data */
case iap_get_ack_or_reset_or_data(c_iap, is_ack_iap, is_reset, datum_iap): case iap_get_ack_or_reset_or_data(c_iap, is_ack_iap, is_reset, datum_iap):

1003
lib_xua/src/core/clocking/clockgen.xc
View File

File diff suppressed because it is too large Load Diff

28
lib_xua/src/core/clocking/sw_pll_wrapper.h
View File

@@ -4,17 +4,9 @@
#ifndef _SW_PLL_WRAPPPER_H_ #ifndef _SW_PLL_WRAPPPER_H_
#define _SW_PLL_WRAPPPER_H_ #define _SW_PLL_WRAPPPER_H_
/* By default we use SW_PLL for Digital Rx configs running on xcore.ai */ #include "xua.h"
/* Note: Not yet implemented for Synchronous mode */
#ifdef __XS3A__
#ifndef USE_SW_PLL
#define USE_SW_PLL 1
#endif /* USE_SW_PLL */
#else
#define USE_SW_PLL 0
#endif /* __XS3A__ */
#if USE_SW_PLL #if XUA_USE_SW_PLL
extern "C" extern "C"
{ {
#include "sw_pll.h" #include "sw_pll.h"
@@ -27,29 +19,29 @@ extern "C"
/** Task that receives an error term, passes it through a PI controller and periodically /** Task that receives an error term, passes it through a PI controller and periodically
* calclulates a sigma delta output value and sends it to the PLL fractional register. * calclulates a sigma delta output value and sends it to the PLL fractional register.
* *
* \param c_sigma_delta Channel connected to the clocking thread to pass raw error terms. * \param c_sw_pll Channel connected to the clocking thread to pass raw error terms.
* \param selected_mclk_rate_ptr Pointer to the mclk rate variable declared in clockgen.
*/ */
void SigmaDeltaTask(chanend c_sigma_delta, unsigned * unsafe selected_mclk_rate_ptr); void sw_pll_task(chanend c_sw_pll);
/** Helper function that sends a special restart command. It causes the SDM task /** Helper function that sends a special restart command. It causes the SDM task
* to quit and restart using the new mclk. * to quit and restart using the new mclk.
* *
* \param c_sigma_delta Channel connected to the clocking thread to pass raw error terms. * \param c_sw_pll Channel connected to the clocking thread to pass raw error terms.
* \param mclk_Rate The mclk frequency in Hz.
*/ */
void restart_sigma_delta(chanend c_sigma_delta); void restart_sigma_delta(chanend c_sw_pll, unsigned mclk_rate);
/** Performs a frequency comparsion between the incoming digital Rx stream and the local mclk. /** Performs a frequency comparsion between the incoming digital Rx stream and the local mclk.
* *
* \param mclk_time_stamp The captured mclk count (using port timer) at the time of sample Rx. * \param mclk_time_stamp The captured mclk count (using port timer) at the time of sample Rx.
* \param mclks_per_sample The nominal number of mclks per audio sample. * \param mclks_per_sample The nominal number of mclks per audio sample.
* \param c_sigma_delta Channel connected to the sigma delta and controller thread. * \param c_sw_pll Channel connected to the sigma delta and controller thread.
* \param receivedSamples The number of received samples since tha last call to this function. * \param receivedSamples The number of received samples since tha last call to this function.
* \param reset_sw_pll_pfd Reference to a flag which will be used to signal reset of this function's state. * \param reset_sw_pll_pfd Reference to a flag which will be used to signal reset of this function's state.
*/ */
void do_sw_pll_phase_frequency_detector_dig_rx( unsigned short mclk_time_stamp, void do_sw_pll_phase_frequency_detector_dig_rx( unsigned short mclk_time_stamp,
unsigned mclks_per_sample, unsigned mclks_per_sample,
chanend c_sigma_delta, chanend c_sw_pll,
int receivedSamples, int receivedSamples,
int &reset_sw_pll_pfd); int &reset_sw_pll_pfd);
@@ -61,5 +53,5 @@ void do_sw_pll_phase_frequency_detector_dig_rx( unsigned short mclk_time_stamp,
* returns The SDM update interval in ticks and the initial DCO setting for nominal frequency */ * returns The SDM update interval in ticks and the initial DCO setting for nominal frequency */
{unsigned, unsigned} InitSWPLL(sw_pll_state_t &sw_pll, unsigned mClk); {unsigned, unsigned} InitSWPLL(sw_pll_state_t &sw_pll, unsigned mClk);
#endif /* USE_SW_PLL */ #endif /* XUA_USE_SW_PLL */
#endif /* _SW_PLL_WRAPPPER_H_ */ #endif /* _SW_PLL_WRAPPPER_H_ */

126
lib_xua/src/core/clocking/sw_pll_wrapper.xc
View File

@@ -7,10 +7,10 @@
#include "sw_pll_wrapper.h" #include "sw_pll_wrapper.h"
#include "xua.h" #include "xua.h"
#if USE_SW_PLL #if XUA_USE_SW_PLL
{unsigned, unsigned} InitSWPLL(sw_pll_state_t &sw_pll, unsigned mClk) {unsigned, unsigned} init_sw_pll(sw_pll_state_t &sw_pll, unsigned mClk)
{ {
/* Autogenerated SDM App PLL setup by dco_model.py using 22.5792_1M profile */ /* Autogenerated SDM App PLL setup by dco_model.py using 22.5792_1M profile */
/* Input freq: 24000000 /* Input freq: 24000000
@@ -74,7 +74,7 @@
void do_sw_pll_phase_frequency_detector_dig_rx( unsigned short mclk_time_stamp, void do_sw_pll_phase_frequency_detector_dig_rx( unsigned short mclk_time_stamp,
unsigned mclks_per_sample, unsigned mclks_per_sample,
chanend c_sigma_delta, chanend c_sw_pll,
int receivedSamples, int receivedSamples,
int &reset_sw_pll_pfd) int &reset_sw_pll_pfd)
{ {
@@ -106,7 +106,8 @@ void do_sw_pll_phase_frequency_detector_dig_rx( unsigned short mclk_time_stamp,
} }
/* send PFD output to the sigma delta thread */ /* send PFD output to the sigma delta thread */
outuint(c_sigma_delta, (int) f_error); outuint(c_sw_pll, (int) f_error);
outct(c_sw_pll, XS1_CT_END);
last_mclk_time_stamp = mclk_time_stamp; last_mclk_time_stamp = mclk_time_stamp;
control_loop_counter = 0; control_loop_counter = 0;
@@ -114,79 +115,88 @@ void do_sw_pll_phase_frequency_detector_dig_rx( unsigned short mclk_time_stamp,
} }
} }
void SigmaDeltaTask(chanend c_sigma_delta, unsigned * unsafe selected_mclk_rate_ptr){ void sw_pll_task(chanend c_sw_pll){
/* Zero is an invalid number and the SDM will not write the frac reg until /* Zero is an invalid number and the SDM will not write the frac reg until
the first control value has been received. This avoids issues with the first control value has been received. This avoids issues with
channel lockup if two tasks (eg. init and SDM) try to write at the same time. */ channel lockup if two tasks (eg. init and SDM) try to write at the same time. */
int f_error = 0; while(1)
int dco_setting = 0; /* gets set at InitSWPLL */
unsigned sdm_interval = 0; /* gets set at InitSWPLL */
sw_pll_state_t sw_pll;
unsafe
{ {
unsigned selected_mclk_rate = inuint(c_sw_pll);
inct(c_sw_pll);
int f_error = 0;
int dco_setting = 0; /* gets set at init_sw_pll */
unsigned sdm_interval = 0; /* gets set at init_sw_pll */
sw_pll_state_t sw_pll;
/* initialse the SDM and gather SDM initial settings */ /* initialse the SDM and gather SDM initial settings */
{sdm_interval, dco_setting} = InitSWPLL(sw_pll, (unsigned)*selected_mclk_rate_ptr); {sdm_interval, dco_setting} = init_sw_pll(sw_pll, selected_mclk_rate);
}
tileref_t this_tile = get_local_tile_id(); tileref_t this_tile = get_local_tile_id();
timer tmr; timer tmr;
int32_t time_trigger; int32_t time_trigger;
tmr :> time_trigger; tmr :> time_trigger;
int running = 1; time_trigger += sdm_interval; /* ensure first loop has correct delay */
int running = 1;
outuint(c_sigma_delta, 0); /* Signal back via clockgen to audio to start I2S */ outuint(c_sw_pll, 0); /* Signal back via clockgen to audio to start I2S */
outct(c_sw_pll, XS1_CT_END);
unsigned rx_word = 0; unsigned rx_word = 0;
while(running) while(running)
{
/* Poll for new SDM control value */
select
{ {
case inuint_byref(c_sigma_delta, rx_word): /* Poll for new SDM control value */
if(rx_word == DISABLE_SDM) select
{ {
f_error = 0; case inuint_byref(c_sw_pll, rx_word):
running = 0; inct(c_sw_pll);
} if(rx_word == DISABLE_SDM)
else
{
f_error = (int32_t)rx_word;
unsafe
{ {
sw_pll_sdm_do_control_from_error(&sw_pll, -f_error); f_error = 0;
dco_setting = sw_pll.sdm_state.current_ctrl_val; running = 0;
} }
} else
break; {
f_error = (int32_t)rx_word;
unsafe
{
sw_pll_sdm_do_control_from_error(&sw_pll, -f_error);
dco_setting = sw_pll.sdm_state.current_ctrl_val;
}
}
break;
/* Do nothing & fall-through. Above case polls only once per loop */ /* Do nothing & fall-through. Above case polls only once per loop */
default: default:
break; break;
} }
/* Wait until the timer value has been reached /* Wait until the timer value has been reached
This implements a timing barrier and keeps This implements a timing barrier and keeps
the loop rate constant. */ the loop rate constant. */
select select
{ {
case tmr when timerafter(time_trigger) :> int _: case tmr when timerafter(time_trigger) :> int _:
time_trigger += sdm_interval; time_trigger += sdm_interval;
break; break;
} }
unsafe { unsafe {
sw_pll_do_sigma_delta(&sw_pll.sdm_state, this_tile, dco_setting); sw_pll_do_sigma_delta(&sw_pll.sdm_state, this_tile, dco_setting);
} }
} /* if running */ } /* while running */
} /* while(1) */
} }
void restart_sigma_delta(chanend c_sigma_delta) void restart_sigma_delta(chanend c_sw_pll, unsigned selected_mclk_rate)
{ {
outuint(c_sigma_delta, DISABLE_SDM); /* Resets SDM */ outuint(c_sw_pll, DISABLE_SDM); /* Resets SDM */
outct(c_sw_pll, XS1_CT_END);
outuint(c_sw_pll, selected_mclk_rate);
outct(c_sw_pll, XS1_CT_END);
} }
#endif /* USE_SW_PLL */ #endif /* XUA_USE_SW_PLL */

64
lib_xua/src/core/main.xc
View File

@@ -314,7 +314,13 @@ void usb_audio_io(chanend ?c_aud_in,
#endif #endif
#if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) #if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN)
, client interface pll_ref_if i_pll_ref , client interface pll_ref_if i_pll_ref
, port ?p_for_mclk_count_aud #endif
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC)
, chanend c_audio_rate_change
#endif
#if ((XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) && XUA_USE_SW_PLL)
, port p_for_mclk_count_aud
, chanend c_sw_pll
#endif #endif
) )
{ {
@@ -324,15 +330,13 @@ void usb_audio_io(chanend ?c_aud_in,
#if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) #if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN)
chan c_dig_rx; chan c_dig_rx;
chan c_mclk_change; /* Notification of new mclk freq to clockgen */ chan c_audio_rate_change; /* Notification of new mclk freq to clockgen and synch */
#if XUA_USE_SW_PLL
/* Connect p_for_mclk_count_aud to clk_audio_mclk so we can count mclks/timestamp in digital rx*/ /* Connect p_for_mclk_count_aud to clk_audio_mclk so we can count mclks/timestamp in digital rx*/
if(!isnull(p_for_mclk_count_aud)) unsigned x = 0;
{ asm("ldw %0, dp[clk_audio_mclk]":"=r"(x));
unsigned x = 0; asm("setclk res[%0], %1"::"r"(p_for_mclk_count_aud), "r"(x));
asm("ldw %0, dp[clk_audio_mclk]":"=r"(x)); #endif /* XUA_USE_SW_PLL */
asm("setclk res[%0], %1"::"r"(p_for_mclk_count_aud), "r"(x));
}
#endif /* (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) */ #endif /* (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) */
#if (XUA_NUM_PDM_MICS > 0) && (PDM_TILE == AUDIO_IO_TILE) #if (XUA_NUM_PDM_MICS > 0) && (PDM_TILE == AUDIO_IO_TILE)
@@ -378,7 +382,9 @@ void usb_audio_io(chanend ?c_aud_in,
#endif #endif
#if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) #if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN)
, c_dig_rx , c_dig_rx
, c_mclk_change #endif
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC || XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN)
, c_audio_rate_change
#endif #endif
#if (XUD_TILE != 0) && (AUDIO_IO_TILE == 0) && (XUA_DFU_EN == 1) #if (XUD_TILE != 0) && (AUDIO_IO_TILE == 0) && (XUA_DFU_EN == 1)
, dfuInterface , dfuInterface
@@ -405,8 +411,12 @@ void usb_audio_io(chanend ?c_aud_in,
c_dig_rx, c_dig_rx,
c_clk_ctl, c_clk_ctl,
c_clk_int, c_clk_int,
p_for_mclk_count_aud, c_audio_rate_change
c_mclk_change); #if XUA_USE_SW_PLL
, p_for_mclk_count_aud
, c_sw_pll
#endif
);
} }
#endif #endif
@@ -483,9 +493,16 @@ int main()
#endif #endif
#endif #endif
#if ((XUA_SYNCMODE == XUA_SYNCMODE_SYNC) || XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) #if (((XUA_SYNCMODE == XUA_SYNCMODE_SYNC && !XUA_USE_SW_PLL) || XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) )
interface pll_ref_if i_pll_ref; interface pll_ref_if i_pll_ref;
#endif #endif
#if ((XUA_SYNCMODE == XUA_SYNCMODE_SYNC || XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) && XUA_USE_SW_PLL)
chan c_sw_pll;
#endif
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC)
chan c_audio_rate_change; /* Notification of new mclk freq to ep_buffer */
#endif
chan c_sof; chan c_sof;
chan c_xud_out[ENDPOINT_COUNT_OUT]; /* Endpoint channels for XUD */ chan c_xud_out[ENDPOINT_COUNT_OUT]; /* Endpoint channels for XUD */
chan c_xud_in[ENDPOINT_COUNT_IN]; chan c_xud_in[ENDPOINT_COUNT_IN];
@@ -507,7 +524,7 @@ int main()
{ {
USER_MAIN_CORES USER_MAIN_CORES
#if ((XUA_SYNCMODE == XUA_SYNCMODE_SYNC) || XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) #if (((XUA_SYNCMODE == XUA_SYNCMODE_SYNC && !XUA_USE_SW_PLL) || XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN))
on tile[PLL_REF_TILE]: PllRefPinTask(i_pll_ref, p_pll_ref); on tile[PLL_REF_TILE]: PllRefPinTask(i_pll_ref, p_pll_ref);
#endif #endif
on tile[XUD_TILE]: on tile[XUD_TILE]:
@@ -578,7 +595,12 @@ int main()
#endif #endif
, c_mix_out , c_mix_out
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC) #if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC)
, c_audio_rate_change
#if (!XUA_USE_SW_PLL)
, i_pll_ref , i_pll_ref
#else
, c_sw_pll
#endif
#endif #endif
); );
//: //:
@@ -593,6 +615,10 @@ int main()
#endif /* XUA_USB_EN */ #endif /* XUA_USB_EN */
} }
#if ((XUA_SYNCMODE == XUA_SYNCMODE_SYNC || XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) && XUA_USE_SW_PLL)
on tile[AUDIO_IO_TILE]: sw_pll_task(c_sw_pll);
#endif
on tile[AUDIO_IO_TILE]: on tile[AUDIO_IO_TILE]:
{ {
@@ -609,14 +635,16 @@ int main()
, dfuInterface , dfuInterface
#endif #endif
#if (XUA_NUM_PDM_MICS > 0) #if (XUA_NUM_PDM_MICS > 0)
#if (PDM_TILE == AUDIO_IO_TILE)
, c_ds_output
#endif
, c_pdm_pcm
#endif #endif
#if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) #if (XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN)
, i_pll_ref , i_pll_ref
#endif
#if (XUA_SYNCMODE == XUA_SYNCMODE_SYNC)
, c_audio_rate_change
#endif
#if ((XUA_SPDIF_RX_EN || XUA_ADAT_RX_EN) && XUA_USE_SW_PLL)
, p_for_mclk_count_audio , p_for_mclk_count_audio
, c_sw_pll
#endif #endif
); );
} }

29
lib_xua/src/core/user/audiohw/audiohw.c Normal file
View File

@@ -0,0 +1,29 @@
// Copyright 2023-2024 XMOS LIMITED.
// This Software is subject to the terms of the XMOS Public Licence: Version 1.
/* Default implementations of AudioHwInit(), AudioHwConfig(), AudioHwConfig_Mute() and AudioHwConfig_UnMute() */
void AudioHwInit() __attribute__ ((weak));
void AudioHwInit()
{
return;
}
void AudioHwConfig(unsigned samFreq, unsigned mClk, unsigned dsdMode, unsigned sampRes_DAC, unsigned sampRes_ADC) __attribute__ ((weak));
void AudioHwConfig(unsigned samFreq, unsigned mClk, unsigned dsdMode, unsigned sampRes_DAC, unsigned sampRes_ADC)
{
return;
}
void AudioHwConfig_Mute() __attribute__ ((weak));
void AudioHwConfig_Mute()
{
return;
}
void AudioHwConfig_UnMute() __attribute__ ((weak));
void AudioHwConfig_UnMute()
{
return;
}

54
lib_xua/src/core/user/audiohw/audiohw.h Normal file
View File

@@ -0,0 +1,54 @@
// Copyright 2023-2024 XMOS LIMITED.
// This Software is subject to the terms of the XMOS Public Licence: Version 1.
#ifndef _AUDIO_HW_H_
#define _AUDIO_HW_H_
/* The functions below should be implemented for the external audio hardware arrangement of a specific design.
* Note, default (empty) implementations of these are provided in audiohub_user.c
*/
/**
* @brief User audio hardware initialisation code
*
* This function is called when the device starts up and should contain user code to perform any required audio hardware initialisation
*/
void AudioHwInit(void);
/**
* @brief User audio hardware configuration code
*
* This function is called when on sample rate change and should contain user code to configure audio hardware
* (clocking, CODECs etc) for a specific mClk/Sample frequency
*
* \param samFreq The new sample frequency (in Hz)
*
* \param mClk The new master clock frequency (in Hz)
*
* \param dsdMode DSD mode, DSD_MODE_NATIVE, DSD_MODE_DOP or DSD_MODE_OFF
*
* \param sampRes_DAC Playback sample resolution (in bits)
*
* \param sampRes_ADC Record sample resolution (in bits)
*/
void AudioHwConfig(unsigned samFreq, unsigned mClk, unsigned dsdMode, unsigned sampRes_DAC, unsigned sampRes_ADC);
/**
* @brief User code mute audio hardware
*
* This function is called before AudioHwConfig() and should contain user code to mute audio hardware before a
* sample rate change in order to reduced audible pops/clicks
*
* Note, if using the application PLL of a xcore.ai device this function will be called before the master-clock is
* changed
*/
void AudioHwConfig_Mute(void);
/**
* @brief User code to un-mute audio hardware
*
* This function is called after AudioHwConfig() and should contain user code to un-mute audio hardware after a
* sample rate change
*/
void AudioHwConfig_UnMute(void);
#endif

45
lib_xua/src/core/user/audiostream/audiostream.h
View File

@@ -1,30 +1,51 @@
// Copyright 2011-2021 XMOS LIMITED. // Copyright 2011-2024 XMOS LIMITED.
// This Software is subject to the terms of the XMOS Public Licence: Version 1. // This Software is subject to the terms of the XMOS Public Licence: Version 1.
#ifndef _AUDIOSTREAM_H_ #ifndef _AUDIOSTREAM_H_
#define _AUDIOSTREAM_H_ #define _AUDIOSTREAM_H_
/* Functions that handle functions that must occur on stream start/stop e.g. DAC mute/un-mute /* Functions that handle functionality that occur on stream start/stop e.g. DAC mute/un-mute.
* * They should be implemented for the external audio hardware arrangement of a specific design.
* THESE NEED IMPLEMENTING FOR A SPECIFIC DESIGN */
*
* */
/* Any actions required for stream start e.g. DAC un-mute - run every stream start */ /**
* @brief User stream start code
*
* User code to perform any actions required at every stream start - either input or output
*/
void UserAudioStreamStart(void); void UserAudioStreamStart(void);
/* Any actions required on stream stop e.g. DAC mute - run every steam stop */ /**
* @brief User stream stop code
*
* User code to perform any actions required on every stream stop - either input or output*/
void UserAudioStreamStop(void); void UserAudioStreamStop(void);
/* Any actions required on input stream start */ /**
* @brief User input stream stop code
*
* User code to perform any actions required on input stream start i.e. device to host
*/
void UserAudioInputStreamStart(void); void UserAudioInputStreamStart(void);
/* Any actions required on input stream stop */ /**
* @brief User input stream stop code
*
* User code to perform any actions required on input stream stop i.e. device to host
*/
void UserAudioInputStreamStop(void); void UserAudioInputStreamStop(void);
/* Any actions required on output stream start */ /**
* @brief User output stream start code
*
* User code to perform any actions required on output stream start i.e. host to device
*/
void UserAudioOutputStreamStart(void); void UserAudioOutputStreamStart(void);
/* Any actions required on output stream stop */ /**
* @brief User output stream stop code
*
* User code to perfrom any actions required on output stream stop i.e. host to device
*/
void UserAudioOutputStreamStop(void); void UserAudioOutputStreamStop(void);
#endif #endif

25
lib_xua/src/core/user/hid/user_hid.h
View File

@@ -1,17 +1,17 @@
// Copyright 2013-2023 XMOS LIMITED. // Copyright 2013-2024 XMOS LIMITED.
// This Software is subject to the terms of the XMOS Public Licence: Version 1. // This Software is subject to the terms of the XMOS Public Licence: Version 1.
/** /**
* @brief Human Interface Device (HID) API * @brief Human Interface Device (HID) API
* *
* This file defines the Application Programming Interface (API) used to record HID * This file defines the Application Programming Interface (API) used to record HID
* events and retrieve a HID Report for sending to a host. * events and retrieve a HID Report for sending to a host.
* The using application has the responsibility to fulfill this API. * The using application has the responsibility to fulfill this API.
* Document section numbers refer to the HID Device Class Definition, version 1.11. * Document section numbers refer to the HID Device Class Definition, version 1.11.
*/ */
#ifndef __USER_HID_H__ #ifndef _USER_HID_H_
#define __USER_HID_H__ #define _USER_HID_H_
#include <stddef.h> #include <stddef.h>
@@ -34,22 +34,16 @@ typedef struct hidEvent_t {
#define HID_MAX_DATA_BYTES ( 4 ) #define HID_MAX_DATA_BYTES ( 4 )
#define HID_EVENT_INVALID_ID ( 0x100 ) #define HID_EVENT_INVALID_ID ( 0x100 )
#if XUA_HID_ENABLED
/** /**
* \brief Get the data for the next HID Report * \brief Get the data for the next HID Report
* *
* \note This function returns the HID data as a list of unsigned char because the
* \c XUD_SetReady_In() accepts data for transmission to the USB Host using
* this type.
*
* \param[in] id The HID Report ID (see 5.6, 6.2.2.7, 8.1 and 8.2) * \param[in] id The HID Report ID (see 5.6, 6.2.2.7, 8.1 and 8.2)
* Set to zero if the application provides only one HID Report * Set to zero if the application provides only one HID Report
* which does not include a Report ID * which does not include a Report ID
* \param[out] hidData The HID data * \param[out] hidData The HID data
* If using Report IDs, this function places the Report ID in * If using Report IDs, this function places the Report ID in
* the first element; otherwise the first element holds the * the first element; otherwise the first element holds the
* first byte of HID event data. * first byte of HID event data.
* *
* \returns The length of the HID Report in the \a hidData argument * \returns The length of the HID Report in the \a hidData argument
* \retval Zero means no new HID event data has been recorded for the given \a id * \retval Zero means no new HID event data has been recorded for the given \a id
@@ -57,9 +51,8 @@ typedef struct hidEvent_t {
size_t UserHIDGetData( const unsigned id, unsigned char hidData[ HID_MAX_DATA_BYTES ]); size_t UserHIDGetData( const unsigned id, unsigned char hidData[ HID_MAX_DATA_BYTES ]);
/** /**
* \brief Initialize HID processing * \brief Initialize HID processing
*/ */
void UserHIDInit( void ); void UserHIDInit( void );
#endif /* ( 0 < HID_CONTROLS ) */ #endif /* _USER_HID_H_ */
#endif /* __USER_HID_H__ */

10
lib_xua/src/core/user/hostactive/hostactive.h
View File

@@ -1,4 +1,12 @@
// Copyright 2013-2021 XMOS LIMITED. // Copyright 2013-2024 XMOS LIMITED.
// This Software is subject to the terms of the XMOS Public Licence: Version 1. // This Software is subject to the terms of the XMOS Public Licence: Version 1.
/**
* @brief User host active code
*
* This function can be used to perform user defined actions based on host present/not-present events.
* This function is called on a change in state.
*
* \param active Indicates if the host is active or not. 1 for active, else 0
*/
void UserHostActive(int active); void UserHostActive(int active);

2
tests/test_sync_clk_basic/Makefile
View File

@@ -3,10 +3,12 @@ TEST_FLAGS ?=
XCC_FLAGS_HS = -O3 -g -DXUD_CORE_CLOCK=600 -save-temps -DUSB_TILE=tile[0] -DLOCAL_CLOCK_INCREMENT=10000 -DLOCAL_CLOCK_MARGIN=100 \ XCC_FLAGS_HS = -O3 -g -DXUD_CORE_CLOCK=600 -save-temps -DUSB_TILE=tile[0] -DLOCAL_CLOCK_INCREMENT=10000 -DLOCAL_CLOCK_MARGIN=100 \
-DBUS_SPEED=2 \ -DBUS_SPEED=2 \
-DXUA_USE_SW_PLL=0 \
$(TEST_FLAGS) $(TEST_FLAGS)
XCC_FLAGS_FS = -O3 -g -DXUD_CORE_CLOCK=600 -save-temps -DUSB_TILE=tile[0] -DLOCAL_CLOCK_INCREMENT=10000 -DLOCAL_CLOCK_MARGIN=100 \ XCC_FLAGS_FS = -O3 -g -DXUD_CORE_CLOCK=600 -save-temps -DUSB_TILE=tile[0] -DLOCAL_CLOCK_INCREMENT=10000 -DLOCAL_CLOCK_MARGIN=100 \
-DBUS_SPEED=1 \ -DBUS_SPEED=1 \
-DXUA_USE_SW_PLL=0 \
$(TEST_FLAGS) $(TEST_FLAGS)
TARGET = test_xs3_600.xn TARGET = test_xs3_600.xn

7
tests/test_sync_clk_basic/src/main.xc
View File

@@ -1,4 +1,4 @@
// Copyright 2022 XMOS LIMITED. // Copyright 2022-2024 XMOS LIMITED.
// This Software is subject to the terms of the XMOS Public Licence: Version 1. // This Software is subject to the terms of the XMOS Public Licence: Version 1.
/* Simple test to ensure reference clock to CS2100 device continues when SOF clock not available /* Simple test to ensure reference clock to CS2100 device continues when SOF clock not available
@@ -173,6 +173,7 @@ int main()
chan c_in[EP_COUNT_IN]; chan c_in[EP_COUNT_IN];
chan c_sof; chan c_sof;
chan c_aud_ctl; chan c_aud_ctl;
chan c_audio_rate_change;
interface pll_ref_if i_pll_ref; interface pll_ref_if i_pll_ref;
@@ -185,7 +186,7 @@ int main()
XUA_Buffer_Ep(c_out[1], /* USB Audio Out*/ XUA_Buffer_Ep(c_out[1], /* USB Audio Out*/
c_in[1], /* USB Audio In */ c_in[1], /* USB Audio In */
c_sof, c_aud_ctl, p_off_mclk, i_pll_ref c_sof, c_aud_ctl, p_off_mclk, c_audio_rate_change, i_pll_ref
); );
} }
@@ -193,4 +194,6 @@ int main()
checker(); checker();
} }
return 0;
} }