Doc update

lib_xua/doc/rst/feat.rst

@@ -10,6 +10,44 @@ If using the "codeless" programming model then the steps in this section are inf
 I2S/TDM
 ~~~~~~~
 
-S/PDIF Transmit
+I2S/TDM is typically fundamental to most products and is built into the ``XUA_AudioHub()`` core.
-~~~~~~~~~~~~~~~
+
+In order to enable I2S on must declare an array of ports for the data-lines (one for each direction)::
+
+    /* Port declarations. Note, the defines come from the xn file */
+    buffered out port:32 p_i2s_dac[]    = {PORT_I2S_DAC0};   /* I2S Data-line(s) */
+    buffered in port:32 p_i2s_adc[]    	= {PORT_I2S_ADC0};   /* I2S Data-line(s) */
+
+Ports for the sample and bit clocks are also required::
+
+    buffered out port:32 p_lrclk        = PORT_I2S_LRCLK;    /* I2S Bit-clock */
+    buffered out port:32 p_bclk         = PORT_I2S_BCLK;     /* I2S L/R-clock */
+
+.. note::
+
+    All of these ports must be buffered, width 32
+
+These ports must then be passed to the ``XUA_AudioHub()`` task appropriately.
+
+.. note::
+
+    Based on whether the xCORE is bus slave/master the ports must be declared as input/output respectively
+
+I2S functionality also requires two clock-blocks, one for bit and sample clock e.g.::
+
+    /* Clock-block declarations */
+    clock clk_audio_bclk                = on tile[0]: XS1_CLKBLK_4;   /* Bit clock */
+    clock clk_audio_mclk                = on tile[0]: XS1_CLKBLK_5;   /* Master clock */
+
+These hardware resources must be passed into the call to ``XUA_AudioHub()``::
+
+    /* AudioHub/IO core does most of the audio IO i.e. I2S (also serves as a hub for all audio) */
+    on tile[0]: XUA_AudioHub(c_aud, clk_audio_mclk, clk_audio_bclk, p_mclk_in, p_lrclk, p_bclk);
+
+For configuration options, master vs slave, TDM etc please see the API section.
+
+
+
+
+