Updates to get L2 working on latest iOS codebase

module_usb_aud_shared/audio.xc

@@ -528,7 +528,7 @@ void audio(chanend c_mix_out, chanend ?c_dig_rx, chanend ?c_config)
 #endif
 
   	/* Initialise master clock generation */
-    ClockingInit();
+    ClockingInit(c_config);
 
     /* Perform required CODEC/ADC/DAC initialisation */
     CodecInit(c_config);
@@ -550,7 +550,7 @@ void audio(chanend c_mix_out, chanend ?c_dig_rx, chanend ?c_config)
         divide = mClk / ( curSamFreq * 64 );
 
         /* Configure clocking for required master clock */
-        ClockingConfig(mClk); 
+        ClockingConfig(mClk, c_config); 
 
         if(!firstRun)
         {

module_usb_aud_shared/clocking/clocking.h

@@ -5,10 +5,10 @@
 /* Functions that handle master clock generation.  These need modifying for an existing design */
 
 /* Any initialisation required for master clock generation - run once at start up */
-void ClockingInit(void);
+void ClockingInit(chanend ?c);
 
 /* Configuration for a specific master clock frequency - run every sample frequency change */
-void ClockingConfig(unsigned mClkFreq);
+void ClockingConfig(unsigned mClkFreq, chanend ?c);
 
 
 /** Clock generation and digital audio I/O handling.

module_usb_aud_shared/i2c/i2c.h

@@ -1,4 +1,29 @@
+/**
+ * Module:  module_usb_aud_shared
+ * Version: 2v3_iosrc0
+ * Build:   5247dfd8ec69594e0670e3b8073efd3c453ad07d
+ * File:    i2c.h
+ *
+ * The copyrights, all other intellectual and industrial 
+ * property rights are retained by XMOS and/or its licensors. 
+ * Terms and conditions covering the use of this code can
+ * be found in the Xmos End User License Agreement.
+ *
+ * Copyright XMOS Ltd 2010
+ *
+ * In the case where this code is a modification of existing code
+ * under a separate license, the separate license terms are shown
+ * below. The modifications to the code are still covered by the 
+ * copyright notice above.
+ *
+ **/                                   
 
+// Channel interface
+void I2cRegWriteC(int deviceAdrs, int Adrs, int WrData,  chanend c);
+
+int I2cRegReadC(int deviceAdrs, int Adrs, chanend c);
+
+// Function interface
 void I2cRegWrite(int deviceAdrs, int Adrs, int WrData,  port AUD_SCLK, port AUD_SDIN);
 
 int I2cRegRead(int deviceAdrs, int Adrs, port AUD_SCLK, port AUD_SDIN);

module_usb_aud_shared/i2c/i2c.xc

@@ -1,6 +1,47 @@
+/**
+ * Module:  module_usb_aud_shared
+ * Version: 2v3_iosrc0
+ * Build:   c1785ffa61c5d34613093518d78adcebd79ae1cc
+ * File:    i2c.xc
+ *
+ * The copyrights, all other intellectual and industrial 
+ * property rights are retained by XMOS and/or its licensors. 
+ * Terms and conditions covering the use of this code can
+ * be found in the Xmos End User License Agreement.
+ *
+ * Copyright XMOS Ltd 2010
+ *
+ * In the case where this code is a modification of existing code
+ * under a separate license, the separate license terms are shown
+ * below. The modifications to the code are still covered by the 
+ * copyright notice above.
+ *
+ **/                                   
 #include <xs1.h>
 #include <print.h>
 
+int I2cRegReadC(int device, int addr, chanend c) {
+   int read;
+   int retVal;
+   c <: 0; // isWrite
+   c <: device;
+   c <: addr;
+   c <: 1; // only ever one byte
+   c :> read;
+   c :> retVal;
+   return read;
+}
+
+void I2cRegWriteC(int device, int addr, int data, chanend c) {
+   int retVal;
+   c <: 1; // isWrite
+   c <: device;
+   c <: addr;
+   c <: 1; // only ever one byte
+   c <: data;
+   c :> retVal;
+}
+
 int I2cRegRead(int device, int addr, port scl, port sda)
 {
     //int Result;

module_usb_aud_shared/pll/pll.h

@@ -1,4 +1,4 @@
-void PllInit(void);
+void PllInit(chanend ?c);
 
 
-void PllMult(unsigned mult);
+void PllMult(unsigned mult, chanend ?c);

module_usb_aud_shared/usb_buffer/decouple.h

@@ -12,8 +12,8 @@
  * \param c_clk_int Optional chanend connected to the clockGen() thread if present
  */
 void decouple(chanend c_audio_out,
-              chanend ?c_led,
-              chanend ?c_midi, chanend ?c_clk_int
+              chanend ?c_midi, 
+              chanend ?c_clk_int
 #ifdef IAP
 , chanend ?c_iap
 #endif

module_usb_midi/src/usb_midi.xc

@@ -6,7 +6,7 @@
 #include "midiinparse.h"
 #include "midioutparse.h"
 #include "queue.h"
-#include "port32A.h"
+//#include "port32A.h"
 #ifdef IAP
 #include "iAP.h"
 #endif
@@ -64,21 +64,33 @@ extern unsigned authenticating;
 // state for auto-selecting dock or USB B
 extern unsigned polltime;
 
+#ifdef IO_EXPANSION
 extern port p_i2c_scl;
 extern port p_i2c_sda;
 #define p_midi_out p_i2c_scl
 #define p_midi_in p_i2c_sda
+#else
+//extern out port p_midi_tx;
+//extern port p_midi_rx;
+#define p_midi_out p_midi_tx
+#define p_midi_in p_midi_rx
+#endif
 
+//#ifdef IO_EXPANSION
+#if 0
 extern timer i2ctimer;
 #define iAPTimer i2ctimer
+#else
+timer iAPTimer;
+#endif
 
-void usb_midi(in port ?p_midi_inj, out port ?p_midi_outj,
+void usb_midi(in port ?p_midi_in, out port ?p_midi_out,
               clock ?clk_midi,
               chanend c_midi,
               unsigned cable_number,
 chanend c_iap, chanend ?c_i2c // iOS stuff
 )
- {
+{
     unsigned symbol = 0x0; // Symbol in progress of being sent out
     unsigned isTX = 0; // Guard when outputting data
     unsigned txT; // Timer value used for outputting
@@ -125,13 +137,17 @@ chanend c_iap, chanend ?c_i2c // iOS stuff
 
 #ifndef MIDI_LOOPBACK
 #ifdef IAP
+#ifdef IO_EXPANSION
     port32A_unset(P32A_I2C_NOTMIDI);
+#endif  
 #endif  
     p_midi_out <: 1; // Start with high bit.
 #ifdef IAP  
+#ifdef IO_EXPANSION
     port32A_set(P32A_I2C_NOTMIDI);
 #endif
 #endif
+#endif
 
 #ifdef IAP
     init_iAP(c_i2c); // uses timer for i2c initialisation pause..